Study of Differences in Behavior and Resistance to Vibratory Cavitation Erosion between GTAW Hardened and Artificially Aged Structures of Cast Aluminum Alloy 5083
The mechanical properties of alloy 5083 and its ease of casting and mechanical processing have led researchers to consider its use in components such as internal combustion engine pistons, valve bodies, pump rotors, and boat propellers. To remain competitive, efforts are focused on increasing its mechanical properties—particularly hardness—through various processes, including volumetric heat treatments and structural hardening. Our research, which investigates cavitation resistance, fits within this direction. It is performed on the cast alloy 5083, which has been hardened by GTAW (Gas Tungsten Arc Welding) remelting. Comparing the results with those from the semifinished and artificially aged states at 450°C (with a one-hour dwell time) demonstrates that hardening via GTAW remelting enhances the structure's resistance to the cyclic loads imposed by cavitation.
Authors
- Ilare Bordeașu (ORCID: https://orcid.org/0000-0003-3580-8168)
- Lavinia Mădălina Micu (ORCID: https://orcid.org/0000-0002-3471-7099)
- Cornelia Laura Sălcianu (ORCID: https://orcid.org/0000-0002-9106-3757)
- Denis Andrei Predu (ORCID: https://orcid.org/0009-0002-1704-0212)
- Raluca Faur
- Nicuşor Alin Sîrbu
Institutions
- Polytechnic University of Timişoara (RO)
Publication Details
- Journal
- Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena
- Published
- 2026-11-18
- DOI
- https://doi.org/10.4028/p-vln6yt
- Primary Topic
- Aluminum Alloy Microstructure Properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00