Biomechanical performance and posterior exposure demand of a cortical bone trajectory–reverse cortical bone trajectory hybrid construct in transforaminal lumbar interbody fusion under osteoporotic conditions: a finite element analysis

Background In osteoporotic patients undergoing transforaminal lumbar interbody fusion (TLIF), achieving sufficient segmental stability while reducing posterior surgical exposure remains challenging. This finite element study aimed to evaluate whether a cortical bone trajectory–reverse cortical bone trajectory (CBT–RCBT) hybrid construct could balance fixation stability and posterior exposure requirements in osteoporotic TLIF. Methods A validated three-dimensional finite element (FE) model of the lumbosacral spine (L3–S1) was developed from thin-slice computed tomography data. An L4–L5 TLIF model was created, and three posterior fixation constructs were simulated under both normal and osteoporotic bone conditions: traditional-trajectory pedicle screws (TT–TT), cortical bone trajectory screws (CBT–CBT), and a hybrid construct combining cranially directed CBT with caudally directed reverse CBT (CBT–RCBT). The inferior surface of S1 was fully constrained. A 500-N compressive follower load and a superimposed 10 N·m moment were applied to simulate flexion, extension, lateral bending, and axial rotation. Outcome measures included L4–L5 range of motion (ROM), interbody cage stress, posterior screw–rod peak stress, mean adjacent-disc stress, and normalized posterior exposure area. Results Under osteoporotic conditions, the CBT–RCBT construct yielded lower ROM than TT–TT and CBT–CBT in extension (0.4195°), lateral bending (0.8978°), and axial rotation (0.4268°), whereas flexion ROM was not the lowest (0.8604°). Compared with CBT–CBT, CBT–RCBT reduced peak stress in the screw–rod system by 17.37%–52.77%, with rotational loading decreasing from 302.1203 MPa to 142.6792 MPa. Cage stress under extension, lateral bending, and axial rotation was also reduced (7.8800 vs 8.0800 MPa; 27.3700 vs 29.7250 MPa; 21.8500 vs 24.9350 MPa), while mean adjacent-disc stress showed no consistent increase across constructs. The normalized posterior exposure area was lowest for the CBT–RCBT strategy (TT–TT:CBT–CBT:CBT–RCBT = 1 : 0.6988 : 0.4038). Conclusions In this osteoporotic TLIF finite element model, the CBT–RCBT hybrid construct demonstrated a direction-dependent biomechanical advantage, with improved stability in extension, lateral bending, and axial rotation, lower posterior fixation stress than CBT–CBT, and reduced posterior exposure demand. These findings support further biomechanical and clinical evaluation of CBT–RCBT in osteoporotic TLIF when reduced posterior exposure is desirable.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-18
DOI
https://doi.org/10.21203/rs.3.rs-11338505/v1
Primary Topic
Spine and Intervertebral Disc Pathology
Type
preprint

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Biomechanical performance and posterior exposure demand of a cortical bone trajectory–reverse cortical bone trajectory hybrid construct in transforaminal lumbar interbody fusion under osteoporotic conditions: a finite element analysis

Zhihao Kang, Wencan Zhang, Kaibin Wang, Xichao Wang et al.
Research Square
Spine and Intervertebral Disc Pathology
preprint

Biomechanical performance and posterior exposure demand of a cortical bone trajectory–reverse cortical bone trajectory hybrid construct in transforaminal lumbar interbody fusion under osteoporotic conditions: a finite element analysis

Zhihao Kang, Wencan Zhang, Kaibin Wang, Xichao Wang, Le Li, Haipeng Si, Wanlong Xu, Xinlong Lu, Xu Zhai, Xinyang Guo, Yanpeng Feng, Chen Liu
preprint en

Abstract

Background In osteoporotic patients undergoing transforaminal lumbar interbody fusion (TLIF), achieving sufficient segmental stability while reducing posterior surgical exposure remains challenging. This finite element study aimed to evaluate whether a cortical bone trajectory–reverse cortical bone trajectory (CBT–RCBT) hybrid construct could balance fixation stability and posterior exposure requirements in osteoporotic TLIF. Methods A validated three-dimensional finite element (FE) model of the lumbosacral spine (L3–S1) was developed from thin-slice computed tomography data. An L4–L5 TLIF model was created, and three posterior fixation constructs were simulated under both normal and osteoporotic bone conditions: traditional-trajectory pedicle screws (TT–TT), cortical bone trajectory screws (CBT–CBT), and a hybrid construct combining cranially directed CBT with caudally directed reverse CBT (CBT–RCBT). The inferior surface of S1 was fully constrained. A 500-N compressive follower load and a superimposed 10 N·m moment were applied to simulate flexion, extension, lateral bending, and axial rotation. Outcome measures included L4–L5 range of motion (ROM), interbody cage stress, posterior screw–rod peak stress, mean adjacent-disc stress, and normalized posterior exposure area. Results Under osteoporotic conditions, the CBT–RCBT construct yielded lower ROM than TT–TT and CBT–CBT in extension (0.4195°), lateral bending (0.8978°), and axial rotation (0.4268°), whereas flexion ROM was not the lowest (0.8604°). Compared with CBT–CBT, CBT–RCBT reduced peak stress in the screw–rod system by 17.37%–52.77%, with rotational loading decreasing from 302.1203 MPa to 142.6792 MPa. Cage stress under extension, lateral bending, and axial rotation was also reduced (7.8800 vs 8.0800 MPa; 27.3700 vs 29.7250 MPa; 21.8500 vs 24.9350 MPa), while mean adjacent-disc stress showed no consistent increase across constructs. The normalized posterior exposure area was lowest for the CBT–RCBT strategy (TT–TT:CBT–CBT:CBT–RCBT = 1 : 0.6988 : 0.4038). Conclusions In this osteoporotic TLIF finite element model, the CBT–RCBT hybrid construct demonstrated a direction-dependent biomechanical advantage, with improved stability in extension, lateral bending, and axial rotation, lower posterior fixation stress than CBT–CBT, and reduced posterior exposure demand. These findings support further biomechanical and clinical evaluation of CBT–RCBT in osteoporotic TLIF when reduced posterior exposure is desirable.

Research Square
Shandong University (CN), Qilu Hospital of Shandong University (CN)
Qilu Hospital of Shandong University, Natural Science Foundation of Shandong Province
Good health and well-being
Spine and Intervertebral Disc Pathology
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon