A Multiphysics Approach for Particle Size Optimization in Shales Using Low-Pressure Nitrogen Adsorption Measurements: Investigations from the Damodar Valley Basin, India

Accurate characterization of complex shale pore networks is critical for various applications ranging from understanding and modeling pore-level changes in caprocks for carbon capture, utilization, and storage sites to unconventional energy exploration. However, the reliability of low-pressure nitrogen adsorption (LPNA) remains hindered by unstandardized sample crushing protocols, introducing an analytical paradox between internal pore accessibility and mechanical structural alteration. Limited studies address this gap, particularly concerning shales in the Indian subcontinent. Furthermore, existing investigations typically rely on restricted sample sets. To address this limitation, this study systematically evaluates the impact of distinct crushed particle sizes, namely M-40 (425 μm), M-120 (125 μm), and M-200 (75 μm), using eight representative core samples from two different formations and sub-basins, namely the Barren Measures (BMF) and Raniganj Formation (RF) from the Raniganj sub-basin (RSB) and Jharia sub-basin (JSB) in the Damodar Valley Basin (DVB), India. A unique multiscale multiphysics approach was deployed, integrating crushed-pore-scale quantitative mineralogy analysis via Rietveld refinement on X-ray diffraction (XRD) data and LPNA parameters of the rock with core-scale high-frequency benchtop ultrasonic analysis. The results indicated that the argillaceous BMF exhibited significantly higher specific surface area (SSA) and total pore volume (TPV) compared to the arenaceous quartzofeldspathic RF. It is also observed that a reduction in particle size systematically enhances gas accessibility, with M-200 yielding SSA values approximately 2.1 times and 1.8 times higher than M-40 in the BMF and RF, respectively. Clay-rich BMF largely retained H3 hysteresis across all particle sizes, whereas the mixed clay-sand RF shifted from H4 to H3 upon progressive reduction of particle size. While bulk-scale compressional wave velocities (Vp) correlate inversely with SSA and TPV, as the fractions get finer, the intermediate M-120 fraction provides the most robust linear relationships overall, with intrinsic clay mineralogy (R2 = 0.69) and internal pore cross-plots (R2 = 0.88). Based on our analysis of the DVB shales, we conclude that the intermediate M-120 fraction represents the optimal threshold for LPNA characterization, successfully liberating isolated nanopores without introducing over-crushing artifacts. The findings from this multiphysics approach advance the standardization of adsorption-based pore characterization in shales, especially for the Indian unconventional reservoir rocks.

Authors

Institutions

Publication Details

Journal
Energy & Fuels
Published
2026-11-19
DOI
https://doi.org/10.1021/acs.energyfuels.6c04090
Primary Topic
Hydrocarbon exploration and reservoir analysis
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A Multiphysics Approach for Particle Size Optimization in Shales Using Low-Pressure Nitrogen Adsorption Measurements: Investigations from the Damodar Valley Basin, India

Hemant Kumar, Jyoti Prakash Singh, Varun Dev Jamwal, Ravi Sharma et al.
1 links
Energy & Fuels
Hydrocarbon exploration and reservoir analysis
article

A Multiphysics Approach for Particle Size Optimization in Shales Using Low-Pressure Nitrogen Adsorption Measurements: Investigations from the Damodar Valley Basin, India

Hemant Kumar, Jyoti Prakash Singh, Varun Dev Jamwal, Ravi Sharma, Nimisha Vedanti, Rimi Malaiya
article en

Abstract

Accurate characterization of complex shale pore networks is critical for various applications ranging from understanding and modeling pore-level changes in caprocks for carbon capture, utilization, and storage sites to unconventional energy exploration. However, the reliability of low-pressure nitrogen adsorption (LPNA) remains hindered by unstandardized sample crushing protocols, introducing an analytical paradox between internal pore accessibility and mechanical structural alteration. Limited studies address this gap, particularly concerning shales in the Indian subcontinent. Furthermore, existing investigations typically rely on restricted sample sets. To address this limitation, this study systematically evaluates the impact of distinct crushed particle sizes, namely M-40 (425 μm), M-120 (125 μm), and M-200 (75 μm), using eight representative core samples from two different formations and sub-basins, namely the Barren Measures (BMF) and Raniganj Formation (RF) from the Raniganj sub-basin (RSB) and Jharia sub-basin (JSB) in the Damodar Valley Basin (DVB), India. A unique multiscale multiphysics approach was deployed, integrating crushed-pore-scale quantitative mineralogy analysis via Rietveld refinement on X-ray diffraction (XRD) data and LPNA parameters of the rock with core-scale high-frequency benchtop ultrasonic analysis. The results indicated that the argillaceous BMF exhibited significantly higher specific surface area (SSA) and total pore volume (TPV) compared to the arenaceous quartzofeldspathic RF. It is also observed that a reduction in particle size systematically enhances gas accessibility, with M-200 yielding SSA values approximately 2.1 times and 1.8 times higher than M-40 in the BMF and RF, respectively. Clay-rich BMF largely retained H3 hysteresis across all particle sizes, whereas the mixed clay-sand RF shifted from H4 to H3 upon progressive reduction of particle size. While bulk-scale compressional wave velocities (Vp) correlate inversely with SSA and TPV, as the fractions get finer, the intermediate M-120 fraction provides the most robust linear relationships overall, with intrinsic clay mineralogy (R2 = 0.69) and internal pore cross-plots (R2 = 0.88). Based on our analysis of the DVB shales, we conclude that the intermediate M-120 fraction represents the optimal threshold for LPNA characterization, successfully liberating isolated nanopores without introducing over-crushing artifacts. The findings from this multiphysics approach advance the standardization of adsorption-based pore characterization in shales, especially for the Indian unconventional reservoir rocks.

Energy & Fuels
Indian Institute of Technology Roorkee (IN), National Geophysical Research Institute (IN)
Council of Scientific and Industrial Research, India
Hydrocarbon exploration and reservoir analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon