Experimental evaluation of tensile tests of fused deposition modeling printed-hole and drilled-hole polylactic acid
This study experimentally investigated the effects of raster angle, printing temperature, and hole-generation method on the tensile behavior of fused deposition modeling-printed polylactic acid specimens containing through-holes. Modified ASTM D638 Type IV specimens were produced at raster angles of 0°, ±45°, and 90° and printing temperatures of 190, 210, and 230 °C, with holes either incorporated during printing or produced subsequently by drilling. Tensile tests were performed to determine the maximum force ( F max ), ultimate tensile strength, energy absorption, and elastic modulus ( E ), while entrance and exit delamination factors were evaluated for drilled specimens. Raster angle was the dominant factor of mechanical responses, with a strong statistically significant effect on ultimate tensile strength, energy absorption, and E (partial η 2 = 0.970, 0.998, and 0.822, respectively; all p < 0.001). Printing temperature significantly affected ultimate tensile strength ( p < 0.001), with the principal improvement occurring between 190 and 210 °C; increasing the temperature further to 230 °C did not improve tensile strength. A significant raster angle × hole-generation method interaction was observed for ultimate tensile strength, energy absorption, and E (all p < 0.001). Within-angle comparisons showed that drilling increased ultimate tensile strength and energy absorption at 0° and 45°, whereas both responses decreased at 90°. Exit delamination was significantly greater than entrance delamination ( p < 0.001), but neither delamination factor showed a significant association with the mechanical responses.
Authors
- Ender Emir (ORCID: https://orcid.org/0000-0003-4972-5064)
Institutions
- Kahramanmaraş Sütçü İmam University (TR)
Publication Details
- Journal
- Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1177/09544089261508383
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00