3D Scan-Based Reverse Engineering of a UAV Winglet: Parametric Reconstruction and Aerodynamic Sensitivity
The article investigates the reconstruction of a digital model of a small fixed-wing unmanned aerial vehicle (UAV) winglet based on high-resolution 3D scanning and the effect of geometric reconstruction errors on aerodynamic characteristics at low Reynolds numbers. The scanned profiles were represented using class-shape transformation (CST) functions of orders N = 1–10, the best-fitting NACA four-digit airfoil and the closest match among 2,151 catalogue airfoils. Parametric 3D models were compared with the scan data, while aerodynamic characteristics were calculated using XFOIL at Re = 1.2–2.8×10⁵, corresponding to a flight speed of 30 m/s. The winglet was found to have a leading-edge sweep of 44°, a tip-to-root chord ratio of 0.41 and a relative thickness of 7.2–10.1 % with an asymmetric distribution. The results demonstrate that the eighth-order CST model achieves reconstruction accuracy close to the scan noise level (approximately 20 μm) and maintains the mean drag-coefficient error within 1.4–2.8 %. In contrast, the closest NACA airfoil results in a 16–22 % change in drag and an overestimation of the maximum lift-to-drag ratio by up to 35 %. The findings establish a practical accuracy criterion for scan-based digital reconstruction of small UAV lifting surfaces.
Authors
- M.E. Abasguliyev (ORCID: https://orcid.org/0009-0000-7211-3264)
Institutions
- Azerbaijan Technical University (AZ)
Publication Details
- Journal
- Herald of the Azerbaijan Engineering Academy
- Published
- 2026-11-18
- DOI
- https://doi.org/10.52171/herald.486
- Primary Topic
- Aerospace and Aviation Technology
- Type
- article
- Field-Weighted Citation Impact
- 0.00