De-inking of surface printing ink on waste polypropylene (PP) milk tea cups using nonionic surfactants
Printing ink on waste polypropylene (PP) milk tea cups severely hinders their high-value recycling. A novel aqueous deinking system was developed with alkyl polyglucoside (APG)/Tween-80 (T-80) as composite surfactants and an eco-friendly mixed solvent of butyl acetate and dipropylene glycol ethyl ether (DPE). Deinking parameters were optimized via single-factor experiments and Box–Behnken response surface methodology, achieving a deinking efficiency of 93.45% under the optimal conditions: 3 wt.% surfactant, 13 wt.% organic solvent, 48°C and 56 min. XRD characterization confirmed the intact α-crystal structure of PP after deinking. Mechanical properties tests showed that the impact strength of deinked PP was significantly recovered, while the bending and tensile strengths were essentially restored to the level of virgin PP. The deinking process followed a synergistic mechanism of solvent penetration, resin swelling, competitive adsorption, roll-up and emulsification. The efficient, low-damage and eco-friendly deinking system provides a promising technical approach for the high-value recycling of printed waste PP, facilitating the development of a circular plastic economy.
Authors
- Qing Huang (ORCID: https://orcid.org/0000-0001-7177-6605)
- Wenyi Yuan (ORCID: https://orcid.org/0009-0001-6756-5423)
- Yue Ning (ORCID: https://orcid.org/0009-0009-2242-6508)
- Jingwen Xu
- Jianming Zhu
- Nuo Xu
- Lijun Xu
- Li Zhang
Institutions
- Shanghai Polytechnic University (CN)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-18
- DOI
- https://doi.org/10.21203/rs.3.rs-11549788/v1
- Primary Topic
- Polymer crystallization and properties
- Type
- preprint
Funders
- Natural Science Foundation of Shanghai
- National Natural Science Foundation of China