Optimizing surfactant selection for high-salinity foam flooding: comparative screening of APGs and Triton X-100 for oil-rich reservoir conditions

Foam-assisted gas injection enhances sweep efficiency during gas flooding but faces challenges due to foam degradation in high-salinity reservoirs and crude oil presence. This study evaluates the performance of three alkyl polyglucosides (APGs) with average chain lengths of 8.5, 10, and 12, along with the synthetic nonionic surfactant Triton X-100, for flooding of high-salinity foam. Chemical screening assessed aqueous stability, surface and interfacial tension (IFT), and foam stability in the presence and absence of medium crude oil, considering foam generation methods. The results show that APGs outperform Triton X-100 in foam stability under high-salinity, oil-rich conditions. Coco glucoside and APG0810 reduced oil–water IFT by 88.6% ± 0.6 and 88.3% ± 1.2, respectively, while Triton X-100 achieved a 93.5% ± 0.5 reduction, indicating strong surface activity for all surfactants. Coco glucoside demonstrated superior foam stability, with only a 4% reduction in CO2 foams and a 6% stability increase in N2 foams upon oil introduction. Triton X-100 exhibited stability losses of 16% and 17% in CO2 and N2 foams, respectively. Air foams produced by blending were highly susceptible to oil, with complete destruction observed for all surfactants except decyl glucoside, which retained some stability despite a 94% reduction. Gas-sparged foams were less affected, with coco glucoside showing the smallest stability loss among APGs at 19%. These findings identify coco glucoside as the most promising APG for CO2 foam flooding in high-salinity, low-temperature, oil-rich reservoirs.

Authors

Institutions

Publication Details

Journal
Journal of Dispersion Science and Technology
Published
2026-11-18
DOI
https://doi.org/10.1080/01932691.2026.2759897
Primary Topic
Enhanced Oil Recovery Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Optimizing surfactant selection for high-salinity foam flooding: comparative screening of APGs and Triton X-100 for oil-rich reservoir conditions

Raheem ULLAH, Aleksei Olegovich Malakhov, Mikhail Alekseevich Varfolomeev, Omar Al-Janabi et al.
3 links
Journal of Dispersion Science and Technology
Enhanced Oil Recovery Techniques
article

Optimizing surfactant selection for high-salinity foam flooding: comparative screening of APGs and Triton X-100 for oil-rich reservoir conditions

Raheem ULLAH, Aleksei Olegovich Malakhov, Mikhail Alekseevich Varfolomeev, Omar Al-Janabi, Emmanuel Ikyerga, Dimitrii A. Zharkov
article en

Abstract

Foam-assisted gas injection enhances sweep efficiency during gas flooding but faces challenges due to foam degradation in high-salinity reservoirs and crude oil presence. This study evaluates the performance of three alkyl polyglucosides (APGs) with average chain lengths of 8.5, 10, and 12, along with the synthetic nonionic surfactant Triton X-100, for flooding of high-salinity foam. Chemical screening assessed aqueous stability, surface and interfacial tension (IFT), and foam stability in the presence and absence of medium crude oil, considering foam generation methods. The results show that APGs outperform Triton X-100 in foam stability under high-salinity, oil-rich conditions. Coco glucoside and APG0810 reduced oil–water IFT by 88.6% ± 0.6 and 88.3% ± 1.2, respectively, while Triton X-100 achieved a 93.5% ± 0.5 reduction, indicating strong surface activity for all surfactants. Coco glucoside demonstrated superior foam stability, with only a 4% reduction in CO2 foams and a 6% stability increase in N2 foams upon oil introduction. Triton X-100 exhibited stability losses of 16% and 17% in CO2 and N2 foams, respectively. Air foams produced by blending were highly susceptible to oil, with complete destruction observed for all surfactants except decyl glucoside, which retained some stability despite a 94% reduction. Gas-sparged foams were less affected, with coco glucoside showing the smallest stability loss among APGs at 19%. These findings identify coco glucoside as the most promising APG for CO2 foam flooding in high-salinity, low-temperature, oil-rich reservoirs.

Journal of Dispersion Science and Technology
Kazan Federal University (RU)
Kazan Federal University
Enhanced Oil Recovery Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon