Impregnation process-structure-property analysis and tensile response of continuous glass-fiber/PLA filaments for 3D-printing
Continuous fiber-reinforced polymer composites offer significant potential for additive manufacturing, but achieving optimal fiber-matrix impregnation remains a critical challenge. This study addresses it by systematically investigating the effect of nozzle temperature and extrusion speed on the impregnation quality and tensile performance of continuous glass-fiber/PLA filaments fabricated via a custom co-extrusion setup. A full-factorial design with three temperatures (463, 483, 503 K) and three speeds (100, 150, 200 mm/min) was employed. SEM cross-sections were quantitatively analyzed to determine fiber volume fraction, resin fraction, void fraction, and an impregnation index, while tensile testing evaluated mechanical performance. Results demonstrated a strong process dependence: higher temperature and lower speed improved matrix impregnation, reducing void content and increasing tensile strength from 92.34 MPa to 146.72 MPa. ANOVA confirmed both factors were highly significant (p < 0.001) and the model explained 90.38% of the variance in tensile strength. Correlation analysis revealed strong relationships between tensile strength and impregnation index (r = 0.981) and between strength and void fraction (r = - 0.982). This study establishes the comprehensive process–structure–property relationship for continuous glass-fiber/PLA filaments, providing a quantitative framework for optimizing continuous-fiber additive manufacturing systems and enabling the production of high-performance structural components with predictable properties.
Authors
- Harshal Nejkar (ORCID: https://orcid.org/0000-0001-7465-0813)
- K. B. M. Swamy (ORCID: https://orcid.org/0000-0002-3908-1747)
Institutions
- National Institute of Technology Karnataka (IN)
Publication Details
- Journal
- Journal of Thermoplastic Composite Materials
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1177/08927057261508227
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00