Studying the Adhesion Strength of Functional Layers of Photomasks and Photomask Blanks with 90–65 nm Design Standards

Abstract― A prerequisite for the creation of reproducible photomask technology is the adhesive strength of the functional layers. Therefore, it is important to consider the reasons that determine the adhesion of films and the influence of various factors on the adhesive strength. The work investigated the adhesion of a photoresistive mask and thin-film functional layers of Cr, MoSiN, MoSiN/Cr photomasks and photomask blanks with design standards of 90–65 nm. A method for measuring the adhesive strength of films has been developed. The studies were conducted on prototype photomasks and photomask blanks on which functional layers were formed by magnetron sputtering. It was found that the values of the adhesion strength of the functional layers on photomasks and photomask blanks differ slightly, while the profiles of the adhesion values on their surfaces are similar. The adhesive strength of Cr, MoSiN, and MoSiN/Cr layers formed by magnetron sputtering on quartz substrates from different manufacturers is at least 1800 g/mm2, however, in some cases cohesive failure of quartz is observed at a tear force of about 1400 g/mm2. When examining the mechanisms of adhesion of functional layers, it was found that the adhesive strength is determined mainly by van der Waals forces. In the process of measuring the adhesive strength of functional layers, cohesive destruction of the quartz substrate occurs in 60% of cases. Cohesive destruction of covalent Si–O bonds occurs at a depth of more than 150 nm in the quartz substrate. The results of the studies showed high values of adhesive strength of the formed functional layers of photomasks and photomask blanks.

Authors

Institutions

Publication Details

Journal
Semiconductors
Published
2026-11-18
DOI
https://doi.org/10.1134/s1063782626700053
Primary Topic
Advancements in Photolithography Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Studying the Adhesion Strength of Functional Layers of Photomasks and Photomask Blanks with 90–65 nm Design Standards

A. V. Anikin
Semiconductors
Advancements in Photolithography Techniques
article

Studying the Adhesion Strength of Functional Layers of Photomasks and Photomask Blanks with 90–65 nm Design Standards

A. V. Anikin
article en

Abstract

Abstract― A prerequisite for the creation of reproducible photomask technology is the adhesive strength of the functional layers. Therefore, it is important to consider the reasons that determine the adhesion of films and the influence of various factors on the adhesive strength. The work investigated the adhesion of a photoresistive mask and thin-film functional layers of Cr, MoSiN, MoSiN/Cr photomasks and photomask blanks with design standards of 90–65 nm. A method for measuring the adhesive strength of films has been developed. The studies were conducted on prototype photomasks and photomask blanks on which functional layers were formed by magnetron sputtering. It was found that the values of the adhesion strength of the functional layers on photomasks and photomask blanks differ slightly, while the profiles of the adhesion values on their surfaces are similar. The adhesive strength of Cr, MoSiN, and MoSiN/Cr layers formed by magnetron sputtering on quartz substrates from different manufacturers is at least 1800 g/mm2, however, in some cases cohesive failure of quartz is observed at a tear force of about 1400 g/mm2. When examining the mechanisms of adhesion of functional layers, it was found that the adhesive strength is determined mainly by van der Waals forces. In the process of measuring the adhesive strength of functional layers, cohesive destruction of the quartz substrate occurs in 60% of cases. Cohesive destruction of covalent Si–O bonds occurs at a depth of more than 150 nm in the quartz substrate. The results of the studies showed high values of adhesive strength of the formed functional layers of photomasks and photomask blanks.

SemiconductorsVol. 60(13)
National Research University of Electronic Technology (RU)
Ministry of Science and Higher Education of the Russian Federation
Advancements in Photolithography Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon