Wettability, water absorption, and thickness swelling behavior of green plant ash- modified bamboo fiber reinforced polylactic acid biocomposites sheet

The effect of different concentrations of plant ash alkali treatment with (5, 10, and 20 wt%) on the water contact angle, water absorption and thickness swelling of bamboo fiber (BR) reinforced polylactic acid (PLA) biocomposites sheets with fixed fiber content (20 wt%) as compared to pure PLA was studied in this work. BR were extracted from raw bamboo culms using a mechanical extraction process followed by pulverization techniques. BR underwent process through soaking in different concentration of plant ash solution for 8 h in 25 °C and were washed with distilled water to remove the alkali content from surface of fiber until become neutral followed with dried in oven on 60–70 °C. The elemental composition of the plant ash was identified by means of energy dispersive x-ray fluorescence (edxrf) to evaluate the elemental composition. The surface wettability of the composite sheet was measured by water contact angle analysis whereas water absorption and thickness swelling were investigated after immersion in distilled water for short periods of time to understand their moisture affinity. The findings showed good result by using fiber treated with plant ash alkali treatment composites compared to the untreated composites in terms of wettability through several tests which are contact angle, water absorption, density and thickness swelling tests. Meanwhile, APBRPLA-5 exhibited highest contact angle, APBRPLA-20 exhibited lowest density value (1.516 ± 0.029 g/cm 3 ). Moreover, there were moderate improvements in Izod impact strength and scanning electron microscopy (sem) images showing morphological characteristic of the modified BR and PLA matrix.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-18
DOI
https://doi.org/10.1038/s41598-026-75878-2
Primary Topic
Natural Fiber Reinforced Composites
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Wettability, water absorption, and thickness swelling behavior of green plant ash- modified bamboo fiber reinforced polylactic acid biocomposites sheet

E.S. Zainudin, S.M. Sapuan, A. Atiqah, M.Y.M. Zuhri et al.
2 links
Scientific Reports
Natural Fiber Reinforced Composites
article

Wettability, water absorption, and thickness swelling behavior of green plant ash- modified bamboo fiber reinforced polylactic acid biocomposites sheet

E.S. Zainudin, S.M. Sapuan, A. Atiqah, M.Y.M. Zuhri, Muhammad Adlan Azka, Fahd Salah Hasan Lahmdi, M. Hazim Hidzer
article en

Abstract

The effect of different concentrations of plant ash alkali treatment with (5, 10, and 20 wt%) on the water contact angle, water absorption and thickness swelling of bamboo fiber (BR) reinforced polylactic acid (PLA) biocomposites sheets with fixed fiber content (20 wt%) as compared to pure PLA was studied in this work. BR were extracted from raw bamboo culms using a mechanical extraction process followed by pulverization techniques. BR underwent process through soaking in different concentration of plant ash solution for 8 h in 25 °C and were washed with distilled water to remove the alkali content from surface of fiber until become neutral followed with dried in oven on 60–70 °C. The elemental composition of the plant ash was identified by means of energy dispersive x-ray fluorescence (edxrf) to evaluate the elemental composition. The surface wettability of the composite sheet was measured by water contact angle analysis whereas water absorption and thickness swelling were investigated after immersion in distilled water for short periods of time to understand their moisture affinity. The findings showed good result by using fiber treated with plant ash alkali treatment composites compared to the untreated composites in terms of wettability through several tests which are contact angle, water absorption, density and thickness swelling tests. Meanwhile, APBRPLA-5 exhibited highest contact angle, APBRPLA-20 exhibited lowest density value (1.516 ± 0.029 g/cm 3 ). Moreover, there were moderate improvements in Izod impact strength and scanning electron microscopy (sem) images showing morphological characteristic of the modified BR and PLA matrix.

Scientific Reports
Universiti Putra Malaysia (MY), Universiti Sains Malaysia (MY), National University of Malaysia (MY)
Ministry of Higher Education, Malaysia
Responsible consumption and production
Natural Fiber Reinforced Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon