Ciśnieniowe procesy membranowe w gospodarce wodno-ściekowej przemysłu galwanicznego
A review, with 39 refs. published in 2005–2025, focusing on heavy metal removal efficiency, membrane properties, process operating conditions, membrane fouling phenomena, and energy consumption. The microfiltration (MF) and ultrafiltration (UF) processes, used as preliminary treatment stages for electroplating wastewater, were discussed. However, they require the use of additional chemical substances. Techniques such as micellar-enhanced microfiltration (MEMF), micellarenhanced ultrafiltration (MEUF), and polymer-enhanced ultrafiltration (PEUF) were presented; which enable heavy metal rejection rate of approx. 89–99%. Furthermore, nanofiltration (NF) and reverse osmosis (RO) processes were compared; these allow for the direct removal of various heavy metals with efficiencies of 74–99% and 94.2–99.9%, resp. However, the application of RO is limited by high operating pressures and costs, higher energy consumption, and membrane susceptibility to fouling. Therefore, integrated membrane systems, such as UF/NF or UF/ RO, appear to be particularly promising. Their application can not only reduce the environmental pollution load but also enable the recovery of heavy metals from the retentate and their subsequent reuse in electroplating processes.
Authors
- Anna Kowalik-Klimczak (ORCID: https://orcid.org/0000-0003-1595-1039)
Publication Details
- Journal
- PRZEMYSŁ CHEMICZNY
- Published
- 2026-11-18
- DOI
- https://doi.org/10.15199/62.2026.11.1
- Primary Topic
- Membrane Separation Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00