Focused Ion Beam Fabrication of Axisymmetric Structures in Silicon Dioxide Using the Edge Milling Process of the Line-by-Line Scanning Strategy

Abstract Focused ion beam systems, typically of gallium ions, have become widely used for the study and fabrication of micro- and nanostructures. The focused ion beam method, used for prototyping optical devices, makes it possible to create surface relief with low roughness. However, implantation of gallium ions into the processed material causes a significant deterioration in the functional characteristics of optical devices. The paper shows that line-by-line scanning with a focused ion beam allows the formation of axisymmetric structures in silicon dioxide substrates in the form of Fresnel phase plates with a low content of implanted gallium. The templates for fabricating the structures consist of two concentric rings with an inner radius of 3.13 and 5.42 μm and a width of 1.30 and 0.84 μm, respectively. Using optical microscopy and energy-dispersive X-ray microanalysis in transmission electron microscopy, the obtained recesses were compared with the recesses of similar structures produced by standard multi-pass scanning. It was found that with line-by-line movement of the ion beam, the peak concentration of gallium atoms in the near-surface region of the sample is less than 5 at % with multi-pass scanning – approximately 33 at %, the thickness of the gallium-enriched layer decreases by approximately half and is close to 20 nm. It was found that such a decrease in the concentration of gallium atoms leads to an increase in the transparency of quartz glass in the ion beam-treated areas of the substrate for structures manufactured by line scanning.

Authors

Institutions

Publication Details

Journal
Semiconductors
Published
2026-11-18
DOI
https://doi.org/10.1134/s1063782626700065
Primary Topic
Ion-surface interactions and analysis
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Focused Ion Beam Fabrication of Axisymmetric Structures in Silicon Dioxide Using the Edge Milling Process of the Line-by-Line Scanning Strategy

Alexander V. Rumyantsev, Roman L. Volkov, Н. И. Боргардт
Semiconductors
Ion-surface interactions and analysis
article

Focused Ion Beam Fabrication of Axisymmetric Structures in Silicon Dioxide Using the Edge Milling Process of the Line-by-Line Scanning Strategy

Alexander V. Rumyantsev, Roman L. Volkov, Н. И. Боргардт
article en

Abstract

Abstract Focused ion beam systems, typically of gallium ions, have become widely used for the study and fabrication of micro- and nanostructures. The focused ion beam method, used for prototyping optical devices, makes it possible to create surface relief with low roughness. However, implantation of gallium ions into the processed material causes a significant deterioration in the functional characteristics of optical devices. The paper shows that line-by-line scanning with a focused ion beam allows the formation of axisymmetric structures in silicon dioxide substrates in the form of Fresnel phase plates with a low content of implanted gallium. The templates for fabricating the structures consist of two concentric rings with an inner radius of 3.13 and 5.42 μm and a width of 1.30 and 0.84 μm, respectively. Using optical microscopy and energy-dispersive X-ray microanalysis in transmission electron microscopy, the obtained recesses were compared with the recesses of similar structures produced by standard multi-pass scanning. It was found that with line-by-line movement of the ion beam, the peak concentration of gallium atoms in the near-surface region of the sample is less than 5 at % with multi-pass scanning – approximately 33 at %, the thickness of the gallium-enriched layer decreases by approximately half and is close to 20 nm. It was found that such a decrease in the concentration of gallium atoms leads to an increase in the transparency of quartz glass in the ion beam-treated areas of the substrate for structures manufactured by line scanning.

SemiconductorsVol. 60(13)
National Research University of Electronic Technology (RU)
Russian Science Foundation
Ion-surface interactions and analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon