Flexural strengthening techniques for ultra-high-performance fiber-reinforced concrete beams: experimental study
This paper aims to investigate the various strengthening techniques for restoring the flexural performance of ultra-high-performance fiber-reinforced concrete (UHPFRC) beams with a simulated reduction in tensile reinforcement, represented by removing one or two steel bars to model a simplified condition of reinforcement loss due to corrosion. The strengthening techniques include near-surface mounting (NSM) of carbon fiber reinforced polymer (CFRP) bars, glass fiber reinforced polymer (GFRP) bars, and a CFRP plate. In addition, a CFRP sheet was used as an externally bonded layer on the tension side of the beam. Six beams were fabricated, which had a cross-section measuring 120 mm in width and 185 mm in depth, with an overall length of 1500 mm. All the beams were tested using a four-point flexural test. The results indicate that the strengthening techniques used significantly improved the load-carrying capacity. The B-2-CFRP beam exhibited the highest ultimate load, representing a 55.6% increase over the control beam (B-CS). In addition, the B-2-CFRP beam demonstrated superior serviceability performance with the highest energy absorption capacity, with 228.2%, compared to the B-CS beam. The predicted-to-experimental capacity ratios ranged from 0.95 to 1.17.
Authors
- Aref A. Abadel (ORCID: https://orcid.org/0000-0002-8498-1402)
- Ali S. Alqarni (ORCID: https://orcid.org/0000-0002-5349-5911)
Institutions
- King Saud University (SA)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1038/s41598-026-81074-z
- Primary Topic
- Structural Behavior of Reinforced Concrete
- Type
- article
- Field-Weighted Citation Impact
- 0.00