Geomechanical Behavior of Filtered Iron Ore Tailings from the ‘Quadrilátero Ferrífero’ (Brazil) for Stack Disposal

This study seeks to determine the geomechanical behavior of iron ore tailings from the ‘Quadrilátero Ferrífero’, Brazil, in a wide range of stresses. An extensive geotechnical investigation campaign was conducted to obtain the normal compression lines (NCLs) and critical state lines (CSLs) of the material. To this end, oedometric consolidation tests and drained (CID) and undrained (CIU) isotropic triaxial tests were performed with consolidation stresses ranging from 100 to 4500 kPa. Curvilinear behavior was observed for both the NCL and CSL in the e-ln p' plane, mainly under high-stress conditions (p' above 6000 kPa), which is explained by the breakage of sandy particles, predominantly silica (SiO2). To verify the granulometric change in the material, the particle breakage index (B_g) and changes in the grain shape were evaluated by scanning electron microscopy (SEM) tests and image interpretation. Based on these results, a division of the CSL of the tailings in the e-ln p' plane was proposed into ranges with geomechanical behavior of strain hardening and fabric change. In addition, calibrations of the dilatancy parameters (N_tc and χ_tc) of the material were performed, from which fabric effects resulting from the initial void ratios of the samples were observed. Finally, an S-CPTu test was performed on experimental dry stacking, where the relationship between the shear modulus (G_0) and the average effective stress (p’) was calibrated. The values of the geomechanical parameters obtained for the material studied were consistent with the results of other studies on iron ore tailings.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-18
DOI
https://doi.org/10.21203/rs.3.rs-9684385/v1
Primary Topic
Tailings Management and Properties
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Geomechanical Behavior of Filtered Iron Ore Tailings from the ‘Quadrilátero Ferrífero’ (Brazil) for Stack Disposal

Bruno Guimarães Delgado, Roberto Lopes Ferraz, Leonardo da Silva Machado, Eduardo Antônio Gomes Marques et al.
3 links
Research Square
Tailings Management and Properties
preprint

Geomechanical Behavior of Filtered Iron Ore Tailings from the ‘Quadrilátero Ferrífero’ (Brazil) for Stack Disposal

Bruno Guimarães Delgado, Roberto Lopes Ferraz, Leonardo da Silva Machado, Eduardo Antônio Gomes Marques, Antonio Viana da Fonseca
preprint en

Abstract

This study seeks to determine the geomechanical behavior of iron ore tailings from the ‘Quadrilátero Ferrífero’, Brazil, in a wide range of stresses. An extensive geotechnical investigation campaign was conducted to obtain the normal compression lines (NCLs) and critical state lines (CSLs) of the material. To this end, oedometric consolidation tests and drained (CID) and undrained (CIU) isotropic triaxial tests were performed with consolidation stresses ranging from 100 to 4500 kPa. Curvilinear behavior was observed for both the NCL and CSL in the e-ln p' plane, mainly under high-stress conditions (p' above 6000 kPa), which is explained by the breakage of sandy particles, predominantly silica (SiO2). To verify the granulometric change in the material, the particle breakage index (B_g) and changes in the grain shape were evaluated by scanning electron microscopy (SEM) tests and image interpretation. Based on these results, a division of the CSL of the tailings in the e-ln p' plane was proposed into ranges with geomechanical behavior of strain hardening and fabric change. In addition, calibrations of the dilatancy parameters (N_tc and χ_tc) of the material were performed, from which fabric effects resulting from the initial void ratios of the samples were observed. Finally, an S-CPTu test was performed on experimental dry stacking, where the relationship between the shear modulus (G_0) and the average effective stress (p’) was calibrated. The values of the geomechanical parameters obtained for the material studied were consistent with the results of other studies on iron ore tailings.

Research Square
Universidade Federal de Viçosa (BR), Universidade do Porto (PT), WSP Civils (United Kingdom) (GB)
Tailings Management and Properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon