Mechanical performance and failure analysis of additively manufactured PLA–carbon fibre, PLA–glass fibre, ABS–carbon fibre, and ABS–glass fibre composites

The present study investigated the influence of carbon fibre (CF) and glass fibre (GF) reinforcement on the tensile, flexural, and impact properties of FDM-fabricated PLA- and ABS-based composites. Six material systems, namely PLA, CF + PLA, GF + PLA, ABS, CF + ABS, and GF + ABS, were fabricated using a 1.75 mm filament and an FDM process with 100 % infill density, 0 mm air gap, flat (0°) build orientation, and 45° raster angle. Tensile, flexural, and impact tests were conducted according to ASTM D638, ASTM D790, and ASTM D256 standards, respectively. The mechanical performance of the FDM-printed components was significantly impacted by the polymer matrix type, reinforcement type, fibre-matrix interaction, and printing parameters. The fracture surfaces of the fibre-reinforced specimens were further examined using scanning electron microscopy (SEM). Among all the investigated materials, the GF + PLA composites exhibited the highest tensile strength (62.3 MPa), flexural strength (24.6 MPa), and impact strength (88.1 kJ/m 2 ). In addition, the CF + PLA composites showed substantial improvements compared with neat PLA, with tensile, flexural, and impact strengths of 44.8 MPa, 11.2 MPa, and 27.93 kJ/m 2 , respectively. For the ABS, CF + ABS and GF + ABS composites improved tensile strength compared with neat ABS, while the CF + ABS showed better flexural and impact performance than neat ABS. The SEM analysis revealed matrix cracking, fibre pull-out, fibre fracture, matrix deformation, crack deflection, and localized fibre–matrix separation, confirming the involvement of fibre-related load-transfer and fracture mechanisms. Overall, the results demonstrated that the GF + PLA composites provided the most favourable combination of the tensile, flexural, and impact performance under the selected FDM processing conditions.

Authors

Institutions

Publication Details

Journal
International Polymer Processing
Published
2026-11-18
DOI
https://doi.org/10.1515/ipp-2026-0093
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Mechanical performance and failure analysis of additively manufactured PLA–carbon fibre, PLA–glass fibre, ABS–carbon fibre, and ABS–glass fibre composites

Pandiarajan Narayanasamy, Putu Hadi Setyarini, Nadir Ayrılmış, Muthu Natarajan Shunmugam et al.
4 links
International Polymer Processing
Additive Manufacturing and 3D Printing Technologies
article

Mechanical performance and failure analysis of additively manufactured PLA–carbon fibre, PLA–glass fibre, ABS–carbon fibre, and ABS–glass fibre composites

Pandiarajan Narayanasamy, Putu Hadi Setyarini, Nadir Ayrılmış, Muthu Natarajan Shunmugam, Selvakumar Muniyandi, Baskaran Selvam, Prithivirajan Rajaram, Parrthipan Balasubramaniyan Karthekeyan
article en

Abstract

The present study investigated the influence of carbon fibre (CF) and glass fibre (GF) reinforcement on the tensile, flexural, and impact properties of FDM-fabricated PLA- and ABS-based composites. Six material systems, namely PLA, CF + PLA, GF + PLA, ABS, CF + ABS, and GF + ABS, were fabricated using a 1.75 mm filament and an FDM process with 100 % infill density, 0 mm air gap, flat (0°) build orientation, and 45° raster angle. Tensile, flexural, and impact tests were conducted according to ASTM D638, ASTM D790, and ASTM D256 standards, respectively. The mechanical performance of the FDM-printed components was significantly impacted by the polymer matrix type, reinforcement type, fibre-matrix interaction, and printing parameters. The fracture surfaces of the fibre-reinforced specimens were further examined using scanning electron microscopy (SEM). Among all the investigated materials, the GF + PLA composites exhibited the highest tensile strength (62.3 MPa), flexural strength (24.6 MPa), and impact strength (88.1 kJ/m 2 ). In addition, the CF + PLA composites showed substantial improvements compared with neat PLA, with tensile, flexural, and impact strengths of 44.8 MPa, 11.2 MPa, and 27.93 kJ/m 2 , respectively. For the ABS, CF + ABS and GF + ABS composites improved tensile strength compared with neat ABS, while the CF + ABS showed better flexural and impact performance than neat ABS. The SEM analysis revealed matrix cracking, fibre pull-out, fibre fracture, matrix deformation, crack deflection, and localized fibre–matrix separation, confirming the involvement of fibre-related load-transfer and fracture mechanisms. Overall, the results demonstrated that the GF + PLA composites provided the most favourable combination of the tensile, flexural, and impact performance under the selected FDM processing conditions.

International Polymer Processing
Madurai Kamaraj University (IN), University of Brawijaya (ID), Istanbul University-Cerrahpaşa (TR), Fatima College (Autonomous) (IN), Istanbul University (TR)
Universitas Brawijaya
Industry, innovation and infrastructure
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon