Effect of Number of Quantum Wells on the Efficiency of InGaN-based Red Light-Emitting Diodes

The influence of the number of quantum wells (QWs) in the active region on the electrical, optical, and efficiency characteristics of InGaN-based red light-emitting diodes (LEDs) was investigated using a self-consistent one-dimensional numerical approach based on the coupled Schrödinger–Poisson equations within the single-band effective-mass approximation. Six LED structures containing 1, 2, 3, 5, 7, and 10 QWs in the active region were analyzed. The results reveal a pronounced trade-off between longer-wavelength emission and electrical efficiency as the number of QWs increases. The turn-on voltage increases systematically from approximately 2.12 V for the single-QW structure to 8.38 V for the 10-QW structure. At a current density of 10 A/cm 2 , the EL peak wavelength changes from 582 nm for the 1-QW structure to 594–636 nm for the multiple-QW structures, with the longest-wavelength emission of 636 nm obtained for the 5-QW structure. For most structures, increasing the current density produces a blue-shift of approximately 3–8 nm in the dominant EL peak, consistent with carrier-induced screening of the polarization fields and the associated quantum-confined Stark effect. The 1-QW structure exhibits the highest peak IQE of 0.684 and the highest WPE, reaching 28% at 100 A/cm 2 . Among the multiple-QW structures, the 2-QW structure provides the highest IQE of 0.470 and the highest WPE of 11.5% at 100 A/cm 2 . In contrast, the 5-QW structure provides the longest-wavelength emission at 629 nm while maintaining a WPE of 7.58% at 100 A/cm 2 . Further increasing the number of QWs to 7 and 10 does not yield a significant additional red-shift but results in higher turn-on voltages and lower WPE. These findings indicate that the optimization of InGaN-based red LEDs requires a balance between QW number, emission wavelength, carrier confinement, and electrical efficiency rather than simply maximizing the number of quantum wells.

Authors

Institutions

Publication Details

Journal
Semiconductors
Published
2026-11-18
DOI
https://doi.org/10.1134/s1063782626603353
Primary Topic
GaN-based semiconductor devices and materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Number of Quantum Wells on the Efficiency of InGaN-based Red Light-Emitting Diodes

Iu. B. Boris, Denis L. Nika, Vadim P. Sirkeli, S. I. Caragacian
1 links
Semiconductors
GaN-based semiconductor devices and materials
article

Effect of Number of Quantum Wells on the Efficiency of InGaN-based Red Light-Emitting Diodes

Iu. B. Boris, Denis L. Nika, Vadim P. Sirkeli, S. I. Caragacian
article en

Abstract

The influence of the number of quantum wells (QWs) in the active region on the electrical, optical, and efficiency characteristics of InGaN-based red light-emitting diodes (LEDs) was investigated using a self-consistent one-dimensional numerical approach based on the coupled Schrödinger–Poisson equations within the single-band effective-mass approximation. Six LED structures containing 1, 2, 3, 5, 7, and 10 QWs in the active region were analyzed. The results reveal a pronounced trade-off between longer-wavelength emission and electrical efficiency as the number of QWs increases. The turn-on voltage increases systematically from approximately 2.12 V for the single-QW structure to 8.38 V for the 10-QW structure. At a current density of 10 A/cm 2 , the EL peak wavelength changes from 582 nm for the 1-QW structure to 594–636 nm for the multiple-QW structures, with the longest-wavelength emission of 636 nm obtained for the 5-QW structure. For most structures, increasing the current density produces a blue-shift of approximately 3–8 nm in the dominant EL peak, consistent with carrier-induced screening of the polarization fields and the associated quantum-confined Stark effect. The 1-QW structure exhibits the highest peak IQE of 0.684 and the highest WPE, reaching 28% at 100 A/cm 2 . Among the multiple-QW structures, the 2-QW structure provides the highest IQE of 0.470 and the highest WPE of 11.5% at 100 A/cm 2 . In contrast, the 5-QW structure provides the longest-wavelength emission at 629 nm while maintaining a WPE of 7.58% at 100 A/cm 2 . Further increasing the number of QWs to 7 and 10 does not yield a significant additional red-shift but results in higher turn-on voltages and lower WPE. These findings indicate that the optimization of InGaN-based red LEDs requires a balance between QW number, emission wavelength, carrier confinement, and electrical efficiency rather than simply maximizing the number of quantum wells.

SemiconductorsVol. 60(12)
Moldova State University (MD), Institute of Applied Physics (MD)
GaN-based semiconductor devices and materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon