PARAMETRIC STUDY OF SCARF ADHESIVE JOINTS UNDER TENSILE LOADING A COMPARATIVE STUDY OF ANALYTICAL, EXPERIMENTAL AND FINITE ELEMENT RESULTS

Adhesive bonding is a promising alternative to mechanically fastened joints since it allows for load transfer over a continuous interface and eliminates holes which can act as stress raisers. In the present work, a scarf bonded joint is studied under static tensile loading. The parameters investigated are the scarf angle, adhesive layer thickness and resin to hardener mixture ratio. Stainless-steel adherends and an epoxy adhesive were used in the source study. The source study combined a Taguchi L9 experimental design with finite element analysis (FEA) and compared numerical predictions with experimental results. The maximum response reported was 2.3808 N/mm2 for a 60° scarf angle, 1 mm adhesive layer and 1:1 mixture ratio. For a representative comparison, the report gives equivalent stress values of 40.86 MPa by mathematical calculation and 42.372 MPa by FEA for a riveted joint, compared with 2.29 MPa analytically, 2.38 MPa by FEA and 2.34 MPa experimentally for the adhesive joint. These values show a much lower recorded stress response of the investigated bonded configuration. However, the dataset is limited to a small number of factor combinations, and the response wording and units reported need to be clarified prior to publication. The paper therefore presents the results as a preliminary parametric investigation and not as a general design rule.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-18
DOI
https://doi.org/10.5281/zenodo.24336309
Primary Topic
Mechanical Behavior of Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

PARAMETRIC STUDY OF SCARF ADHESIVE JOINTS UNDER TENSILE LOADING A COMPARATIVE STUDY OF ANALYTICAL, EXPERIMENTAL AND FINITE ELEMENT RESULTS

Amol Gayakwad Mayur Khairnar
Zenodo (CERN European Organization for Nuclear Research)
Mechanical Behavior of Composites
article

PARAMETRIC STUDY OF SCARF ADHESIVE JOINTS UNDER TENSILE LOADING A COMPARATIVE STUDY OF ANALYTICAL, EXPERIMENTAL AND FINITE ELEMENT RESULTS

Amol Gayakwad Mayur Khairnar
article en

Abstract

Adhesive bonding is a promising alternative to mechanically fastened joints since it allows for load transfer over a continuous interface and eliminates holes which can act as stress raisers. In the present work, a scarf bonded joint is studied under static tensile loading. The parameters investigated are the scarf angle, adhesive layer thickness and resin to hardener mixture ratio. Stainless-steel adherends and an epoxy adhesive were used in the source study. The source study combined a Taguchi L9 experimental design with finite element analysis (FEA) and compared numerical predictions with experimental results. The maximum response reported was 2.3808 N/mm2 for a 60° scarf angle, 1 mm adhesive layer and 1:1 mixture ratio. For a representative comparison, the report gives equivalent stress values of 40.86 MPa by mathematical calculation and 42.372 MPa by FEA for a riveted joint, compared with 2.29 MPa analytically, 2.38 MPa by FEA and 2.34 MPa experimentally for the adhesive joint. These values show a much lower recorded stress response of the investigated bonded configuration. However, the dataset is limited to a small number of factor combinations, and the response wording and units reported need to be clarified prior to publication. The paper therefore presents the results as a preliminary parametric investigation and not as a general design rule.

Zenodo (CERN European Organization for Nuclear Research)
Mechanical Behavior of Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon