Microfibrillated Cellulose as a Reinforcement Agent in Acrylonitrile Styrene Acrylate (ASA) for MEX 3D Printing: A Thermomechanical and Rheological Filler Content Assessment

In this study, acrylonitrile styrene acrylate (ASA), a thermoplastic with great resistance to weather conditions, was combined with the nature-sourced microfibrillated cellulose (MFC) to produce composites with improved properties in additive manufacturing (AM). Filament extrusion was used to fabricate the filaments. The test specimens were 3D printed for thermal, rheological, dynamic mechanical, and mechanical characterization. The thermal behavior was assessed by thermogravimetric analysis and differential scanning calorimetry, while the rheological performance was evaluated through viscosity and material flow rate measurements. The effect of MFC on quality metrics (dimensional accuracy and porosity) was also assessed using microcomputed tomography. Among the five composites investigated (0.5–2.5 wt % MFC, step 0.5 wt %), the 1.5 wt % sample showed the best overall performance, except in Vickers microhardness. Compared with pure ASA, this composite improved tensile strength and toughness, flexural toughness, and Charpy impact strength by approximately 13%, tensile modulus by 15%, flexural modulus by 12%, and flexural strength by approximately 28%. The highest Vickers microhardness was achieved by the 1.0 wt % composite, showing a 30.8% increase over pure ASA. Overall, the introduction of the biobased MFC, even at low loadings, enhanced the mechanical strength of ASA and improved the quality metrics. Such findings highlight the potential of ASA/MFC as a sustainable composite for outdoor 3D printing applications.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-18
DOI
https://doi.org/10.1021/acsomega.6c11290
Primary Topic
Advanced Cellulose Research Studies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Microfibrillated Cellulose as a Reinforcement Agent in Acrylonitrile Styrene Acrylate (ASA) for MEX 3D Printing: A Thermomechanical and Rheological Filler Content Assessment

Nectarios Vidakis, Nektarios K. Nasikas, Markos Petousis, Nikolaos Mountakis et al.
3 links
ACS Omega
Advanced Cellulose Research Studies
article

Microfibrillated Cellulose as a Reinforcement Agent in Acrylonitrile Styrene Acrylate (ASA) for MEX 3D Printing: A Thermomechanical and Rheological Filler Content Assessment

Nectarios Vidakis, Nektarios K. Nasikas, Markos Petousis, Nikolaos Mountakis, Emmanuel I. Stratakis, Nikolaos Michailidis, Katerina Gkagkanatsiou, Maria Spyridaki, Vassilis Papadakis
article en

Abstract

In this study, acrylonitrile styrene acrylate (ASA), a thermoplastic with great resistance to weather conditions, was combined with the nature-sourced microfibrillated cellulose (MFC) to produce composites with improved properties in additive manufacturing (AM). Filament extrusion was used to fabricate the filaments. The test specimens were 3D printed for thermal, rheological, dynamic mechanical, and mechanical characterization. The thermal behavior was assessed by thermogravimetric analysis and differential scanning calorimetry, while the rheological performance was evaluated through viscosity and material flow rate measurements. The effect of MFC on quality metrics (dimensional accuracy and porosity) was also assessed using microcomputed tomography. Among the five composites investigated (0.5–2.5 wt % MFC, step 0.5 wt %), the 1.5 wt % sample showed the best overall performance, except in Vickers microhardness. Compared with pure ASA, this composite improved tensile strength and toughness, flexural toughness, and Charpy impact strength by approximately 13%, tensile modulus by 15%, flexural modulus by 12%, and flexural strength by approximately 28%. The highest Vickers microhardness was achieved by the 1.0 wt % composite, showing a 30.8% increase over pure ASA. Overall, the introduction of the biobased MFC, even at low loadings, enhanced the mechanical strength of ASA and improved the quality metrics. Such findings highlight the potential of ASA/MFC as a sustainable composite for outdoor 3D printing applications.

ACS Omega
Harbin Engineering University (CN), Aristotle University of Thessaloniki (GR), Hellenic Military Academy (GR), Interbalkan Medical Center (GR), Hellenic Mediterranean University (GR), University of West Attica (GR), Centre for Research and Technology Hellas (GR), Foundation for Research and Technology Hellas (GR)
Foundation for Research and Technology-Hellas
Responsible consumption and production
Advanced Cellulose Research Studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon