Finite Element Analysis of TiO2–ZrO2 Modified Glazes for Porcelain Insulators under Wet Polluted Conditions

Porcelain insulators used in 22 kV distribution networks can experience performance degradation under wet polluted conditions due to increased surface conduction and concentrated electrical stress. This study numerically evaluates TiO 2 –ZrO 2 -modified glaze formulations for a Type 57-2 porcelain line-post insulator using the finite-element method. The ZrO 2 content was fixed, while the TiO 2 content was varied by partially replacing conventional glaze constituents. The effective relative permittivity was estimated through weight-to-volume fraction conversion and a multicomponent Maxwell-Garnett model. The polluted surface was represented by a conductive surface boundary condition with an equivalent conductivity derived from an ESC-based conversion. Compared with the conventional glaze, the modified formulations produced smoother potential grading and lower peak electric-field intensity. The peak electric field was reduced by 10.5%, 10.7%, 11.3%, and 11.9% for Cases 2–5, respectively. Case 5, containing 30 wt% TiO₂ and 20 wt% ZrO₂, provided the greatest field reduction. Because the same equivalent surface conductivity was applied to all cases, the reduced local electric field suggests a lower local current-density tendency along the polluted surface. Flashover, dry-band formation, and total leakage current were not directly simulated; therefore, the results are interpreted as comparative electrical-stress indicators. The proposed framework provides an efficient preliminary tool for selecting promising glaze formulations before experimental validation.

Authors

Institutions

Publication Details

Journal
Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena
Published
2026-11-18
DOI
https://doi.org/10.4028/p-im3j6o
Primary Topic
High voltage insulation and dielectric phenomena
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Finite Element Analysis of TiO2–ZrO2 Modified Glazes for Porcelain Insulators under Wet Polluted Conditions

Norrawit Tonmitr, Peeranat Chunlanin, Thammasak Chetawan, Sora At Tanusilp
Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena
High voltage insulation and dielectric phenomena
article

Finite Element Analysis of TiO2–ZrO2 Modified Glazes for Porcelain Insulators under Wet Polluted Conditions

Norrawit Tonmitr, Peeranat Chunlanin, Thammasak Chetawan, Sora At Tanusilp
article en

Abstract

Porcelain insulators used in 22 kV distribution networks can experience performance degradation under wet polluted conditions due to increased surface conduction and concentrated electrical stress. This study numerically evaluates TiO 2 –ZrO 2 -modified glaze formulations for a Type 57-2 porcelain line-post insulator using the finite-element method. The ZrO 2 content was fixed, while the TiO 2 content was varied by partially replacing conventional glaze constituents. The effective relative permittivity was estimated through weight-to-volume fraction conversion and a multicomponent Maxwell-Garnett model. The polluted surface was represented by a conductive surface boundary condition with an equivalent conductivity derived from an ESC-based conversion. Compared with the conventional glaze, the modified formulations produced smoother potential grading and lower peak electric-field intensity. The peak electric field was reduced by 10.5%, 10.7%, 11.3%, and 11.9% for Cases 2–5, respectively. Case 5, containing 30 wt% TiO₂ and 20 wt% ZrO₂, provided the greatest field reduction. Because the same equivalent surface conductivity was applied to all cases, the reduced local electric field suggests a lower local current-density tendency along the polluted surface. Flashover, dry-band formation, and total leakage current were not directly simulated; therefore, the results are interpreted as comparative electrical-stress indicators. The proposed framework provides an efficient preliminary tool for selecting promising glaze formulations before experimental validation.

Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomenaVol. 396
Khon Kaen University (TH)
High voltage insulation and dielectric phenomena
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon