Sustainable hybrid water hyacinth/basalt waste-filled PBS composites: Processing, structure and multifunctional performance

This study explores biodegradable polymer composites made from renewable biomass and mineral fillers, offering a sustainable path for engineering materials. Poly(butylene succinate) (PBS) composites were created by incorporating alkali-treated water hyacinth (WH) and basalt filler (BF) at a fixed 40 wt.% total filler load via twin-screw extrusion and compression molding. The research examines how lignocellulosic and inorganic fillers, both individually and in hybrid combinations, affect the mechanical, thermal, viscoelastic, rheological, surface, and morphological properties of PBS. Adding fillers decreased tensile strength and impact resistance compared to pure PBS due to limited chain mobility, interfacial stress, and filler-induced crack initiation. Nevertheless, notable increases in stiffness were observed, especially in the 60P40 W composite, which achieved a tensile modulus of 832.30 MPa and a flexural modulus of 3182.92 MPa, compared to 222.12 MPa and 637.82 MPa for neat PBS. Basalt-reinforced PBS exhibited higher strength and toughness, with tensile strength of 21.58 MPa, flexural strength of 45.06 MPa, and impact strength of 3.06 kJ/m 2 . The hybrid composite reached the highest Shore D hardness of 72.52, indicating enhanced surface durability. Differential scanning calorimetry (DSC) revealed composition-dependent changes in PBS crystallinity after normalization to the polymer mass fraction. Thermogravimetric analysis (TGA) revealed higher residual mass retention in basalt-containing composites, with 60P40B retaining 38.62 wt.% at 600°C, primarily due to the thermally stable inorganic nature of basalt. Dynamic mechanical analysis (DMA) revealed higher storage modulus and damping for WH-rich composites, with 60P40 W attaining an E′ of 4548.67 MPa and a tan δ of 0.45. Rheological tests showed that water hyacinth significantly increased melt viscosity due to interactions between the filler and the matrix. These PBS/WH/BF composites demonstrate potential for use in non-load-bearing automotive interior components, protective casings, and vibration-damping panels, where stiffness and surface hardness are prioritized. However, their practical suitability requires further evaluation of biodegradation behavior, long-term durability, moisture resistance, creep, and thermal aging.

Authors

Institutions

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
Published
2026-11-18
DOI
https://doi.org/10.1177/14644207261507537
Primary Topic
Natural Fiber Reinforced Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Sustainable hybrid water hyacinth/basalt waste-filled PBS composites: Processing, structure and multifunctional performance

Naruemon Sumrith, Rapeeporn Srisuk, Vinod Ayyappan, Laongdaw Techawinyutham et al.
4 links
Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
Natural Fiber Reinforced Composites
article

Sustainable hybrid water hyacinth/basalt waste-filled PBS composites: Processing, structure and multifunctional performance

Naruemon Sumrith, Rapeeporn Srisuk, Vinod Ayyappan, Laongdaw Techawinyutham, Suchart Siengchin, Chakaphan Ngaowthong, Sanjay Mavinkere Rangappa
article en

Abstract

This study explores biodegradable polymer composites made from renewable biomass and mineral fillers, offering a sustainable path for engineering materials. Poly(butylene succinate) (PBS) composites were created by incorporating alkali-treated water hyacinth (WH) and basalt filler (BF) at a fixed 40 wt.% total filler load via twin-screw extrusion and compression molding. The research examines how lignocellulosic and inorganic fillers, both individually and in hybrid combinations, affect the mechanical, thermal, viscoelastic, rheological, surface, and morphological properties of PBS. Adding fillers decreased tensile strength and impact resistance compared to pure PBS due to limited chain mobility, interfacial stress, and filler-induced crack initiation. Nevertheless, notable increases in stiffness were observed, especially in the 60P40 W composite, which achieved a tensile modulus of 832.30 MPa and a flexural modulus of 3182.92 MPa, compared to 222.12 MPa and 637.82 MPa for neat PBS. Basalt-reinforced PBS exhibited higher strength and toughness, with tensile strength of 21.58 MPa, flexural strength of 45.06 MPa, and impact strength of 3.06 kJ/m 2 . The hybrid composite reached the highest Shore D hardness of 72.52, indicating enhanced surface durability. Differential scanning calorimetry (DSC) revealed composition-dependent changes in PBS crystallinity after normalization to the polymer mass fraction. Thermogravimetric analysis (TGA) revealed higher residual mass retention in basalt-containing composites, with 60P40B retaining 38.62 wt.% at 600°C, primarily due to the thermally stable inorganic nature of basalt. Dynamic mechanical analysis (DMA) revealed higher storage modulus and damping for WH-rich composites, with 60P40 W attaining an E′ of 4548.67 MPa and a tan δ of 0.45. Rheological tests showed that water hyacinth significantly increased melt viscosity due to interactions between the filler and the matrix. These PBS/WH/BF composites demonstrate potential for use in non-load-bearing automotive interior components, protective casings, and vibration-damping panels, where stiffness and surface hardness are prioritized. However, their practical suitability requires further evaluation of biodegradation behavior, long-term durability, moisture resistance, creep, and thermal aging.

Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
King Mongkut's University of Technology North Bangkok (TH), Saveetha University (IN)
Responsible consumption and production, Affordable and clean energy, Industry, innovation and infrastructure
Natural Fiber Reinforced Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon