Effect of Layer Thickness Ratio on the Roof Thermal Performance of Bilayer Waterborne Acrylic Coatings with a Barium Sulfate Reflective Topcoat and a Silica Aerogel Insulating Basecoat

Reflective and insulating fillers are often combined in roof coatings, but the benefit attributed to their arrangement depends on optical properties, thickness constraints, and comparator selection. This study examines that dependence using an integrated optical–thermal evaluation framework for a waterborne acrylic bilayer with a barium sulfate reflective topcoat and a silica aerogel insulating basecoat. An optical saturation relationship is combined with transient one-dimensional heat conduction through a concrete roof at a nominal total coating thickness of 2.0 mm. The lowest daily positive inward heat gain among the original twelve allocations is 206.34 Wh m−2 at a reflective fraction of 0.35, compared with 219.76 Wh m−2 for the reflector-only reference. A finer fraction grid places the reference minimum at 0.335, with only a 0.013% difference from 0.35. A joint sensitivity assessment of eight bounded inputs across 512 parameter combinations gives minimizing fractions from 0.175 to 0.625. At a fixed fraction of 0.35, the paired benefit has 5th–95th percentiles across the investigated conditions of −1.00% to 6.07%, and is negative in 51 scenarios. Equal-optics controls eliminate the apparent effect of reversing the layers. Distributed coating storage changes the reference benefit from 6.11% to approximately 6.00%. These findings provide a systematic basis for optimizing the thickness allocation of bilayer reflective–insulating coatings by integrating optical saturation, thermal resistance, and parameter uncertainty. The proposed framework offers quantitative guidance for coating configuration design and establishes a foundation for subsequent experimental verification and practical applications.

Authors

Institutions

Publication Details

Journal
Coatings
Published
2026-11-18
DOI
https://doi.org/10.3390/coatings16111374
Primary Topic
Building Energy and Comfort Optimization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Layer Thickness Ratio on the Roof Thermal Performance of Bilayer Waterborne Acrylic Coatings with a Barium Sulfate Reflective Topcoat and a Silica Aerogel Insulating Basecoat

Jianhua Ma, Jingke Xu, Lingyu Jia
1 links
Coatings
Building Energy and Comfort Optimization
article

Effect of Layer Thickness Ratio on the Roof Thermal Performance of Bilayer Waterborne Acrylic Coatings with a Barium Sulfate Reflective Topcoat and a Silica Aerogel Insulating Basecoat

Jianhua Ma, Jingke Xu, Lingyu Jia
article en

Abstract

Reflective and insulating fillers are often combined in roof coatings, but the benefit attributed to their arrangement depends on optical properties, thickness constraints, and comparator selection. This study examines that dependence using an integrated optical–thermal evaluation framework for a waterborne acrylic bilayer with a barium sulfate reflective topcoat and a silica aerogel insulating basecoat. An optical saturation relationship is combined with transient one-dimensional heat conduction through a concrete roof at a nominal total coating thickness of 2.0 mm. The lowest daily positive inward heat gain among the original twelve allocations is 206.34 Wh m−2 at a reflective fraction of 0.35, compared with 219.76 Wh m−2 for the reflector-only reference. A finer fraction grid places the reference minimum at 0.335, with only a 0.013% difference from 0.35. A joint sensitivity assessment of eight bounded inputs across 512 parameter combinations gives minimizing fractions from 0.175 to 0.625. At a fixed fraction of 0.35, the paired benefit has 5th–95th percentiles across the investigated conditions of −1.00% to 6.07%, and is negative in 51 scenarios. Equal-optics controls eliminate the apparent effect of reversing the layers. Distributed coating storage changes the reference benefit from 6.11% to approximately 6.00%. These findings provide a systematic basis for optimizing the thickness allocation of bilayer reflective–insulating coatings by integrating optical saturation, thermal resistance, and parameter uncertainty. The proposed framework offers quantitative guidance for coating configuration design and establishes a foundation for subsequent experimental verification and practical applications.

CoatingsVol. 16(11)
Huanghe Jiaotong University (CN)
Building Energy and Comfort Optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon