An Up-Conversion Single-Photon Detector: Conversion Efficiency, Noise and Bandwidth Budgets from Computed Nonlinear Optics
Counting single photons at fibre wavelengths with a silicon detector is impossible directly, because silicon is blind there, but shifting the photon to a shorter wavelength in a nonlinear crystal lets a silicon detector count it. Operating principle: an up-conversion detector, in which a fibre-wavelength photon mixes with a strong pump in a periodically poled crystal and is converted to a shorter wavelength that a silicon avalanche diode can count. The up-conversion detector converts photons at a wavelength of 1550 nanometres with a conversion efficiency of 35 percent, reaching a system efficiency of 28 percent with a noise count rate of 1000 counts per second. The converter shifts fibre-wavelength photons into the band where silicon counts best, which is the capability that makes fibre quantum communication measurable with room-temperature detectors. SIMULATED, NOT MEASURED. This is a computed study for a civilian sensing purpose: the device serves imaging, sensing, communications or illumination, and it carries no targeting or weapon application against any person, state or terrestrial object.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-18
- DOI
- https://doi.org/10.5281/zenodo.24336874
- Primary Topic
- Photorefractive and Nonlinear Optics
- Type
- article
- Field-Weighted Citation Impact
- 0.00