Hydroxylated metatitanic acid engineering of K2CO3/Al2O3 sorbents enables highly regenerable and cyclically stable CO2 capture

Carbonate-based solid sorbents are promising for low-temperature CO 2 capture, but their practical application is often hindered by incomplete regeneration and capacity loss arising from strong interactions between K 2 CO 3 and alumina. Although titanium-containing modifiers have been investigated in related sorbents, the role of hydroxyl-rich metatitanic acid (TiO(OH) 2 ) in K 2 CO 3 /Al 2 O 3 systems remains insufficiently established. Herein, K 2 CO 3 was supported on high-surface-area active alumina derived from NH 4 HCO 3 -modified flash-calcined gibbsite and subsequently modified with hydroxyl-rich metatitanic acid (TiO(OH) 2 ) to engineer the carbonate–oxide interface. The modified alumina provided a high accessible surface area of 350 m 2 g − 1 , facilitating K 2 CO 3 dispersion and interfacial modification. The optimized sorbent containing 20 wt% K 2 CO 3 and 30 wt% metatitanic acid achieved a CO 2 adsorption capacity of 2.96 mmol g − 1 at 20°C and 7 bar, consistent with response surface model predictions. Metatitanic acid substantially reconstructed the porous structure, increasing the accessible surface area of K 2 CO 3 /Al 2 O 3 from 114.7 to 243.7 m 2 g − 1 while maintaining a highly dispersed carbonate phase. Equilibrium data were best described by the Freundlich model, indicating heterogeneous adsorption sites, while thermodynamic analysis revealed spontaneous and exothermic adsorption. Most importantly, metatitanic acid markedly enhanced regenerability, with an optimized regeneration condition of 140°C for 40 min yielding ~ 99% regeneration efficiency. The optimized sorbent retained 96.5% of its initial capacity after ten adsorption–regeneration cycles. These results demonstrate that hydroxyl-rich metatitanic acid is an effective interfacial engineering strategy for developing regenerable and durable K 2 CO 3 /Al 2 O 3 sorbents for low-temperature CO 2 capture.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-18
DOI
https://doi.org/10.21203/rs.3.rs-11446996/v1
Primary Topic
Carbon Dioxide Capture Technologies
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Hydroxylated metatitanic acid engineering of K2CO3/Al2O3 sorbents enables highly regenerable and cyclically stable CO2 capture

Amin Bazyari, Shahrokh Shahhosseini, Mohammad Shahrzad Karkan
1 links
Research Square
Carbon Dioxide Capture Technologies
preprint

Hydroxylated metatitanic acid engineering of K2CO3/Al2O3 sorbents enables highly regenerable and cyclically stable CO2 capture

Amin Bazyari, Shahrokh Shahhosseini, Mohammad Shahrzad Karkan
preprint en

Abstract

Carbonate-based solid sorbents are promising for low-temperature CO 2 capture, but their practical application is often hindered by incomplete regeneration and capacity loss arising from strong interactions between K 2 CO 3 and alumina. Although titanium-containing modifiers have been investigated in related sorbents, the role of hydroxyl-rich metatitanic acid (TiO(OH) 2 ) in K 2 CO 3 /Al 2 O 3 systems remains insufficiently established. Herein, K 2 CO 3 was supported on high-surface-area active alumina derived from NH 4 HCO 3 -modified flash-calcined gibbsite and subsequently modified with hydroxyl-rich metatitanic acid (TiO(OH) 2 ) to engineer the carbonate–oxide interface. The modified alumina provided a high accessible surface area of 350 m 2 g − 1 , facilitating K 2 CO 3 dispersion and interfacial modification. The optimized sorbent containing 20 wt% K 2 CO 3 and 30 wt% metatitanic acid achieved a CO 2 adsorption capacity of 2.96 mmol g − 1 at 20°C and 7 bar, consistent with response surface model predictions. Metatitanic acid substantially reconstructed the porous structure, increasing the accessible surface area of K 2 CO 3 /Al 2 O 3 from 114.7 to 243.7 m 2 g − 1 while maintaining a highly dispersed carbonate phase. Equilibrium data were best described by the Freundlich model, indicating heterogeneous adsorption sites, while thermodynamic analysis revealed spontaneous and exothermic adsorption. Most importantly, metatitanic acid markedly enhanced regenerability, with an optimized regeneration condition of 140°C for 40 min yielding ~ 99% regeneration efficiency. The optimized sorbent retained 96.5% of its initial capacity after ten adsorption–regeneration cycles. These results demonstrate that hydroxyl-rich metatitanic acid is an effective interfacial engineering strategy for developing regenerable and durable K 2 CO 3 /Al 2 O 3 sorbents for low-temperature CO 2 capture.

Research Square
Iran University of Science and Technology (IR)
Climate action, Responsible consumption and production
Carbon Dioxide Capture Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon