Numerical Investigation of Contact Detonation Effects on an Unreinforced Brick Masonry Wall: Charge Configuration, Explosive Type, and Debris Response

Masonry walls are widely used in civil engineering and architecture, but their heterogeneous and discontinuous nature makes the numerical simulation of their response to high dynamic loads challenging. In this study, the effects of explosive geometry, charge mass, charge density, and explosive type on the blast-induced damage and debris response of an unreinforced brick wall were investigated using LS-DYNA. The numerical model was first assessed against the 1-kg contact-detonation configuration reported by a reference article. The maximum debris velocity obtained in the present simulation was 67.1 m/s, compared with approximately 70 m/s in the reference numerical model, corresponding to a difference of 4.14%, and 80 m/s in the corresponding experiment. Among the investigated approximately 1-kg contact-detonation configurations, the cubic charge resulted in the highest maximum debris velocity (67.1 m/s), compared with 40.0, 48.2, and 50.3 m/s for the spherical, perpendicular cylindrical, and parallel cylindrical charges, respectively. For the investigated 4-kg configurations, changes in charge volume and density produced configuration-dependent responses: the maximum debris velocity decreased for the spherical and perpendicular cylindrical configurations, while the damage state and kinetic-energy response did not change uniformly across all geometries. Among the investigated explosive types, HMX produced the highest maximum debris velocity of 116.3 m/s, compared with 67.1 m/s for TNT. However, because the explosive materials have different densities, detonation velocities, JWL parameters, and corresponding charge volumes, the individual effects of explosive type and its physical properties cannot be isolated independently from the present comparisons. The results provide a numerical basis for investigating blast-induced damage and debris generation in unreinforced masonry walls subjected to contact detonation.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-18
DOI
https://doi.org/10.21203/rs.3.rs-11466849/v1
Primary Topic
Structural Response to Dynamic Loads
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Numerical Investigation of Contact Detonation Effects on an Unreinforced Brick Masonry Wall: Charge Configuration, Explosive Type, and Debris Response

Farshid Kholoosi, Saman Jafari
1 links
Research Square
Structural Response to Dynamic Loads
preprint

Numerical Investigation of Contact Detonation Effects on an Unreinforced Brick Masonry Wall: Charge Configuration, Explosive Type, and Debris Response

Farshid Kholoosi, Saman Jafari
preprint en

Abstract

Masonry walls are widely used in civil engineering and architecture, but their heterogeneous and discontinuous nature makes the numerical simulation of their response to high dynamic loads challenging. In this study, the effects of explosive geometry, charge mass, charge density, and explosive type on the blast-induced damage and debris response of an unreinforced brick wall were investigated using LS-DYNA. The numerical model was first assessed against the 1-kg contact-detonation configuration reported by a reference article. The maximum debris velocity obtained in the present simulation was 67.1 m/s, compared with approximately 70 m/s in the reference numerical model, corresponding to a difference of 4.14%, and 80 m/s in the corresponding experiment. Among the investigated approximately 1-kg contact-detonation configurations, the cubic charge resulted in the highest maximum debris velocity (67.1 m/s), compared with 40.0, 48.2, and 50.3 m/s for the spherical, perpendicular cylindrical, and parallel cylindrical charges, respectively. For the investigated 4-kg configurations, changes in charge volume and density produced configuration-dependent responses: the maximum debris velocity decreased for the spherical and perpendicular cylindrical configurations, while the damage state and kinetic-energy response did not change uniformly across all geometries. Among the investigated explosive types, HMX produced the highest maximum debris velocity of 116.3 m/s, compared with 67.1 m/s for TNT. However, because the explosive materials have different densities, detonation velocities, JWL parameters, and corresponding charge volumes, the individual effects of explosive type and its physical properties cannot be isolated independently from the present comparisons. The results provide a numerical basis for investigating blast-induced damage and debris generation in unreinforced masonry walls subjected to contact detonation.

Research Square
Bu-Ali Sina University (IR)
Structural Response to Dynamic Loads
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon