*Hyperparameter Sensitivity of CatBoost for Texture Prediction in Non-Oriented Electrical Steels: Effects of Learning Rate and Maximum Tree Depth on Predictive Performance**

* ## Alternative Title**Tuning CatBoost for Data-Driven Texture Engineering: A Systematic Study of Learning Rate and Tree Depth Using a Synthetic Electrical-Steel Dataset** ## Subtitle**A grid-search analysis (depth 4–10, learning rate 0.01–0.10) identifying depth 8 and learning rate 0.03 as optimal, with overfitting diagnostics, iteration effects, and practical tuning recommendations for small tabular materials datasets** ## Detailed Description This research paper investigates how two critical CatBoost hyperparameters—**learning rate** and **maximum tree depth**—affect the model’s ability to predict Goss texture intensity \(\{110\}\langle001\rangle\) and core loss \(P_{1.5/50}\) in non-oriented electrical steels. The study uses the same 212-point synthetic dataset from the companion methodology paper, where targets are generated from physically motivated response surfaces that embed known metallurgical trends (annealing temperature and cold reduction promote Goss; Al and low temperature promote \(\gamma\)-fiber). A full grid search over tree depth \(\{4,6,8,10\}\) and learning rate \(\{0.01,0.03,0.10\}\) is performed with 500 iterations and 5-fold cross-validation. Results show a clear depth–learning-rate interaction: shallow trees (depth 4) underfit even at high learning rate (best test \(R^2 = 0.77\)), while deep trees (depth 10) with learning rate 0.10 overfit, with a train–test gap of 0.15. The optimal configuration is **depth 8 with learning rate 0.03**, achieving test \(R^2 = 0.84\), RMSE = 0.33 m.r.d., and MAE = 0.27 m.r.d. Learning rate 0.01 requires more than 500 iterations to converge; extending to 1000–1500 iterations raises test \(R^2\) from 0.78 to 0.83 but does not surpass the depth-8/LR-0.03 result. Core loss prediction shows the same optimal configuration (test \(R^2 = 0.81\)). A comparison with tuned Random Forest and XGBoost confirms CatBoost’s advantage (best test \(R^2 = 0.84\) vs 0.79 and 0.74, respectively). The paper reports full grid results, iteration curves, train–test gap analysis, and practical tuning rules: start with depth 6–8 and LR 0.03; avoid depth 10 with LR 0.10 on small datasets; monitor the train–test gap (above 0.10 indicates overfitting); and use cross-validation for configuration selection. Limitations are stated explicitly: the data are synthetic, the training set is small (170 samples), and random splitting may overestimate performance. For real industrial data, grouped cross-validation by coil/heat and extrapolation tests on held-out composition grades are recommended. The work provides a reproducible hyperparameter-tuning template for data-driven texture engineering in electrical steels and a clear statement of the gap between synthetic demonstration and experimental validation.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-18
DOI
https://doi.org/10.5281/zenodo.24340276
Primary Topic
Machine Learning in Materials Science
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

*Hyperparameter Sensitivity of CatBoost for Texture Prediction in Non-Oriented Electrical Steels: Effects of Learning Rate and Maximum Tree Depth on Predictive Performance**

Sudhakar Geruganti
5 links
Zenodo (CERN European Organization for Nuclear Research)
Machine Learning in Materials Science
preprint

*Hyperparameter Sensitivity of CatBoost for Texture Prediction in Non-Oriented Electrical Steels: Effects of Learning Rate and Maximum Tree Depth on Predictive Performance**

Sudhakar Geruganti
preprint en

Abstract

* ## Alternative Title**Tuning CatBoost for Data-Driven Texture Engineering: A Systematic Study of Learning Rate and Tree Depth Using a Synthetic Electrical-Steel Dataset** ## Subtitle**A grid-search analysis (depth 4–10, learning rate 0.01–0.10) identifying depth 8 and learning rate 0.03 as optimal, with overfitting diagnostics, iteration effects, and practical tuning recommendations for small tabular materials datasets** ## Detailed Description This research paper investigates how two critical CatBoost hyperparameters—**learning rate** and **maximum tree depth**—affect the model’s ability to predict Goss texture intensity \(\{110\}\langle001\rangle\) and core loss \(P_{1.5/50}\) in non-oriented electrical steels. The study uses the same 212-point synthetic dataset from the companion methodology paper, where targets are generated from physically motivated response surfaces that embed known metallurgical trends (annealing temperature and cold reduction promote Goss; Al and low temperature promote \(\gamma\)-fiber). A full grid search over tree depth \(\{4,6,8,10\}\) and learning rate \(\{0.01,0.03,0.10\}\) is performed with 500 iterations and 5-fold cross-validation. Results show a clear depth–learning-rate interaction: shallow trees (depth 4) underfit even at high learning rate (best test \(R^2 = 0.77\)), while deep trees (depth 10) with learning rate 0.10 overfit, with a train–test gap of 0.15. The optimal configuration is **depth 8 with learning rate 0.03**, achieving test \(R^2 = 0.84\), RMSE = 0.33 m.r.d., and MAE = 0.27 m.r.d. Learning rate 0.01 requires more than 500 iterations to converge; extending to 1000–1500 iterations raises test \(R^2\) from 0.78 to 0.83 but does not surpass the depth-8/LR-0.03 result. Core loss prediction shows the same optimal configuration (test \(R^2 = 0.81\)). A comparison with tuned Random Forest and XGBoost confirms CatBoost’s advantage (best test \(R^2 = 0.84\) vs 0.79 and 0.74, respectively). The paper reports full grid results, iteration curves, train–test gap analysis, and practical tuning rules: start with depth 6–8 and LR 0.03; avoid depth 10 with LR 0.10 on small datasets; monitor the train–test gap (above 0.10 indicates overfitting); and use cross-validation for configuration selection. Limitations are stated explicitly: the data are synthetic, the training set is small (170 samples), and random splitting may overestimate performance. For real industrial data, grouped cross-validation by coil/heat and extrapolation tests on held-out composition grades are recommended. The work provides a reproducible hyperparameter-tuning template for data-driven texture engineering in electrical steels and a clear statement of the gap between synthetic demonstration and experimental validation.

Zenodo (CERN European Organization for Nuclear Research)
Machine Learning in Materials Science
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon