Comparative Analysis of Transmission and Attenuation Coefficients of Silane-Treated Sodium Lime Glass/Polycaprolactone Composites Fabricated by the Melt Blend Technique
The growing use of electronic and wireless devices has increased the need for lightweight, low-cost materials that attenuate microwave radiation. Conventional absorbers based on ferrite and carbon are expensive, environmentally hazardous and non-recyclable. This study investigates waste sodium lime glass (NLG) cullet as a microwave-attenuating filler in a biodegradable polycaprolactone (PCL) matrix, with particular attention to the effect of silane surface treatment. The glass was crushed, ball-milled to a micrometre-sized powder, and functionalised with 3-aminopropyltriethoxysilane (APTES) to improve its compatibility with the hydrophobic polymer. The treated particles were incorporated into molten PCL by melt blending at filler loadings of 12.5, 22.5, 37.5, 50.0 and 62.5 wt%, and the blends were cast in a stainless-steel mould. The complex permittivity of the composites was measured over the X-band (8–12 GHz) using an open-ended coaxial probe connected to a vector network analyser. The transmission coefficient (S21) was measured in a rectangular waveguide, and the attenuation was calculated from it. The finite element method in COMSOL Multiphysics was used to determine the transmission and attenuation coefficients numerically. The results show that the transmission coefficient decreases steadily as filler content increases, consistent with impedance mismatch theory and with effective dispersion of the filler in the matrix. Attenuation therefore rises with filler loading, from its lowest value at 12.5 wt% NLG to its highest at 62.5 wt% NLG. The composites achieved shielding effectiveness between 3.4 and 6.5 dB. These findings show that recycled glass and PCL can be combined into a cost-effective, environmentally friendly microwave shielding material. Such materials can be tailored for use in the electronics, telecommunications and medical industries.
Authors
- Bashir Yahaya
- Bilyaminu Usman
- Ibrahim Magaji Kotorkoshi
- Ahmed Jimoh
Institutions
- Abdullahi Fodio University of Science and Technology (NG)
- Zamfara State College of Education Maru (NG)
Publication Details
- Journal
- Iconic Research and Engineering Journals
- Published
- 2026-11-18
- DOI
- https://doi.org/10.64388/ire1725324
- Primary Topic
- Electromagnetic wave absorption materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00