Diffusion-based constraint in topology optimization for additive manufacturing
This work presents an efficient method for identifying local and global overheating during additive manufacturing. The manufacturing process offers nearly complete design freedom without additional constraints. Regions prone to overheating must be integrated into the build platform using optimized support structures that enhance thermal conductivity during manufacturing. A single steady-state heat transfer analysis will be conducted instead of recreating the additive manufacturing process with its numerous layers. This greatly increases efficiency and reduces computational time. The information from this presented method can be used to optimize designs suited for additive manufacturing, thereby reducing overheating issues. As a result, geometries can be generated that do not require support structures, improving overall build quality. The current implementation is based on homogeneous, structured two-dimensional grids with potential extension to unstructured three-dimensional meshes. An extension to unstructured three-dimensional meshes is feasible, enabling application within widely used software solutions. The foundation of the code is provided by the open-source finite element solver CalculiX combined with a Python optimization module. The code is available at https://github.com/stoli89/topopt4ccx .
Authors
- Miroslav Zetek (ORCID: https://orcid.org/0000-0003-2599-2061)
- Jakub Rosenthal (ORCID: https://orcid.org/0009-0009-7140-2385)
- Patrick Stolarczyk (ORCID: https://orcid.org/0009-0002-6636-4029)
Institutions
- Ostbayerische Technische Hochschule Amberg-Weiden (DE)
- University of West Bohemia in Pilsen (CZ)
Publication Details
- Journal
- Progress in Additive Manufacturing
- Published
- 2026-11-19
- DOI
- https://doi.org/10.1007/s40964-026-02018-7
- Primary Topic
- Topology Optimization in Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- European Regional Development Fund