Efficient multi-level cooling architecture for an active vibration control unit exceeding 1120 W
Active vibration control units are crucial for ensuring accuracy in ultra-precision engineering, yet their intensive real-time computational loads generate high heat fluxes that threaten system stability. To address thermal dissipation under severe spatial constraints, this study proposes a multi-level thermal design methodology spanning system-level component matching and cold-plate optimization. A fan–radiator coupled model based on thermodynamic equilibrium was established to quantitatively match fan aerodynamic characteristics with the effective heat-transfer area of the radiator, reducing spatial redundancy under volume constraints. At the component level, an optimized cold plate incorporating a three-stage deflector and discontinuous short fins was developed to alleviate the thermo-hydraulic conflict caused by increasing fin density. Under a 360 W thermal load, the optimized design reduced the overall flow resistance by approximately 2300 Pa to 7409.84 Pa while maintaining effective heat dissipation. These results provide a systematic thermal design approach for high-power active vibration control units under restricted space.
Authors
- Linyi Xiang (ORCID: https://orcid.org/0009-0007-7515-7861)
- Zhaoyu Liu (ORCID: https://orcid.org/0009-0001-9713-9767)
- Guanying Xing (ORCID: https://orcid.org/0009-0004-1892-249X)
- Song Xue (ORCID: https://orcid.org/0000-0003-1292-9522)
- Ruikang Wu
- Xiaobing Luo
Institutions
- ZTE (China) (CN)
- China-EU Institute for Clean and Renewable Energy (CN)
- Huazhong University of Science and Technology (CN)
Publication Details
- Journal
- Case Studies in Thermal Engineering
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1016/j.csite.2026.108730
- Primary Topic
- Heat Transfer and Optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Ministry of Education of the People's Republic of China
- China Academy of Engineering Physics
- Science Challenge Project