Optimization of Hydrothermal Acid Activation of Coir Fibers: Enhancing Cellulose Yield and Cationic Dye Removal

The development of sustainable biosorbents from lignocellulosic biomass is often limited by low yield and the energy-intensive fractionation required to enhance specific components and tailor their physicochemical properties for industrial scalability. To address this, an I-optimal response surface methodology (RSM) optimization approach was used to optimize the parameters of the acid-assisted hydrothermal activation process for coir fibers, simultaneously maximizing cellulose yield and methylene blue (MB) removal efficiency. The synergistic effects of acid concentration (0.5–1.0 mol/L), temperature (90–160 °C), activation time (30–150 min), and acid type (HCl, H3PO4) were evaluated. 1.0 mol/L HCl stood out, and the linear model was the best fit for both cases; the acid type influenced MB removal efficiency, while temperature and time negatively impacted the cellulose yield. Optimal conditions (1.0 M HCl, 120 °C, 90 min) achieved a balanced performance with 80.6% cellulose yield and MB removal efficiency (90.7%, 9.07 mg/g). The distinct mesoporous profile framework and the shift of surface charge from 5.8 to 2.1 pHpzc were confirmed by BET surface analysis and the point of zero charge plot. Adsorption of MB onto the surface of the modified coir fiber adsorbents was endothermic chemisorption (ΔH0 = +117.84 kJ/mol) and underwent a spontaneous shift at elevated temperature (45 °C), well fitted by Temkin, Langmuir, pseudo-second-order kinetic (PSO), and intraparticle diffusion (IPD) models for describing the adsorption mechanism. The maximum efficiency (97.82%, 9.78 mg/g) was recorded at the optimum conditions (initial MB concentration = 50 mg/L, dose = 0.5 g/L, pH 11, contact time = 150, temperature 45 °C). Hence, the hydrochar produced in this work has shown promise for scalability.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-18
DOI
https://doi.org/10.1021/acsomega.6c02595
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Optimization of Hydrothermal Acid Activation of Coir Fibers: Enhancing Cellulose Yield and Cationic Dye Removal

Muthumuni Managa, Tlou Nathaniel Moja, Mukuna Patrick Mubiayi, Bosco Barnabas Mtweve
3 links
ACS Omega
Adsorption and biosorption for pollutant removal
article

Optimization of Hydrothermal Acid Activation of Coir Fibers: Enhancing Cellulose Yield and Cationic Dye Removal

Muthumuni Managa, Tlou Nathaniel Moja, Mukuna Patrick Mubiayi, Bosco Barnabas Mtweve
article en

Abstract

The development of sustainable biosorbents from lignocellulosic biomass is often limited by low yield and the energy-intensive fractionation required to enhance specific components and tailor their physicochemical properties for industrial scalability. To address this, an I-optimal response surface methodology (RSM) optimization approach was used to optimize the parameters of the acid-assisted hydrothermal activation process for coir fibers, simultaneously maximizing cellulose yield and methylene blue (MB) removal efficiency. The synergistic effects of acid concentration (0.5–1.0 mol/L), temperature (90–160 °C), activation time (30–150 min), and acid type (HCl, H3PO4) were evaluated. 1.0 mol/L HCl stood out, and the linear model was the best fit for both cases; the acid type influenced MB removal efficiency, while temperature and time negatively impacted the cellulose yield. Optimal conditions (1.0 M HCl, 120 °C, 90 min) achieved a balanced performance with 80.6% cellulose yield and MB removal efficiency (90.7%, 9.07 mg/g). The distinct mesoporous profile framework and the shift of surface charge from 5.8 to 2.1 pHpzc were confirmed by BET surface analysis and the point of zero charge plot. Adsorption of MB onto the surface of the modified coir fiber adsorbents was endothermic chemisorption (ΔH0 = +117.84 kJ/mol) and underwent a spontaneous shift at elevated temperature (45 °C), well fitted by Temkin, Langmuir, pseudo-second-order kinetic (PSO), and intraparticle diffusion (IPD) models for describing the adsorption mechanism. The maximum efficiency (97.82%, 9.78 mg/g) was recorded at the optimum conditions (initial MB concentration = 50 mg/L, dose = 0.5 g/L, pH 11, contact time = 150, temperature 45 °C). Hence, the hydrochar produced in this work has shown promise for scalability.

ACS Omega
University of South Africa (ZA)
University of South Africa, Institute for Nanotechnology and Water Sustainability, University of South Africa
Responsible consumption and production, Affordable and clean energy, Clean water and sanitation
Adsorption and biosorption for pollutant removal
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon