Chemicznie modyfikowany PET jako materiał membranotwórczy. Wpływ struktury polimeru na rozpuszczalność w alternatywnych układach rozpuszczalnikowych
Poly(ethylene terephthalate) (PET) was modified by glycolysis using aliphatic diols (1,5-pentanediol, neopentyl glycol, and mixts. of the latter with 1,6-hexanediol), followed by polycondensation. The effect of the chem. modification on the soly. of the PET in tetrahydrofuran, N,N-dimethylformamide, Cyrene™ (dihydrolevoglucosenone), and dimethyl sulfoxide was studied at temp. of 40 and 60°C. The structure of the resulting copolyesters was confirmed by FT-IR spectroscopy, and their molecular weights were detd. using gel permeation chromatog. (GPC). Unmodified PET did not dissolve in any of the tested systems; material modified with neopentyl glycol alone showed only partial soly., whereas the other modified materials formed homogeneous solns. The broadest range of soly. was obsd. for copolymers obtained from diol mixts. Membranes were prepd. from the resulting solns. via the wet phase inversion method. SEM anal. revealed that the surface morphol. depends on the solvent used: solns. in Cyrene™ yielded porous structures with a wide pore-size distribution, while solns. in N,N-dimethylformamide resulted in more compact surfaces with visible globular domains.
Authors
- Paulina Rajewska (ORCID: https://orcid.org/0000-0003-0560-3540)
Publication Details
- Journal
- PRZEMYSŁ CHEMICZNY
- Published
- 2026-11-18
- DOI
- https://doi.org/10.15199/62.2026.11.7
- Primary Topic
- Membrane Separation Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00