Agreement Between Pre- and Post-extraction Cone-Beam Computed Tomography Linear Measurements of Socket Walls for Immediate Implant Planning: An In Vitro Pilot Study

Introduction: In immediate implant placement, the thickness of the remaining socket wall after tooth extraction is strongly associated with the extent of subsequent bone resorption. This exploratory pilot study aimed to assess the agreement between cone-beam computed tomography (CBCT) measurements of buccal and lingual bone thickness and crestal bone level in dentate sites before extraction, and those obtained at the same sites after extraction. Materials and methods: Thirty-one single-rooted teeth in six dentate dry human mandibles (convenience sample) were included. CBCT scans (PreXion3D Excelsior; PreXion Corp., San Mateo, CA, USA) were acquired with and without the tooth in place, at standard (0.1 mm slice thickness) and high (0.05 mm slice thickness) resolution. Scans with and without the tooth were superimposed, and two examiners performed linear measurements of crestal bone level and of bone thickness at 3, 6, and 9 mm apical to the cementoenamel junction. Measurements obtained before and after extraction were compared using two one-sided tests for equivalence with a prespecified, clinically derived margin of ±0.2 mm, stratified by resolution, surface, and measurement level, with a sensitivity analysis at alternative margins. Intra- and inter-examiner reliability was evaluated with the intraclass correlation coefficient (ICC). Results: Intra- and inter-examiner reliability was excellent (ICC > 0.9). Measurements obtained before and after extraction were equivalent within ±0.2 mm in all strata (p < 0.05), except for bone thickness measured at 9 mm on high-resolution scans (p = 0.349; mean difference -0.172 mm, 90% confidence interval -0.293 to -0.050 mm). Bone thickness tended to be slightly underestimated, and crestal bone level slightly overestimated, in the presence of the tooth. All strata met equivalence at a margin of ±0.30 mm, whereas fewer strata met a margin of ±0.15 mm. Conclusions: In this in vitro pilot study, pre-extraction CBCT measurements of socket-wall thickness and crestal bone level showed close agreement with post-extraction measurements of the same sites. Because the comparator was CBCT itself, absolute accuracy could not be established. These preliminary findings may support presurgical CBCT assessment for immediate implant planning but require confirmation in adequately powered studies with an independent reference standard and clinical validation.

Authors

Institutions

Publication Details

Journal
Cureus
Published
2026-11-18
DOI
https://doi.org/10.7759/cureus.119893
Primary Topic
Dental Radiography and Imaging
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Agreement Between Pre- and Post-extraction Cone-Beam Computed Tomography Linear Measurements of Socket Walls for Immediate Implant Planning: An In Vitro Pilot Study

Nayla Baaklini, Vasileios Zisis, Hassem Geha, Nabil Ghosn et al.
1 links
Cureus
Dental Radiography and Imaging
article

Agreement Between Pre- and Post-extraction Cone-Beam Computed Tomography Linear Measurements of Socket Walls for Immediate Implant Planning: An In Vitro Pilot Study

Nayla Baaklini, Vasileios Zisis, Hassem Geha, Nabil Ghosn, Nikolaos Shinas, Joe Cordahi
article en

Abstract

Introduction: In immediate implant placement, the thickness of the remaining socket wall after tooth extraction is strongly associated with the extent of subsequent bone resorption. This exploratory pilot study aimed to assess the agreement between cone-beam computed tomography (CBCT) measurements of buccal and lingual bone thickness and crestal bone level in dentate sites before extraction, and those obtained at the same sites after extraction. Materials and methods: Thirty-one single-rooted teeth in six dentate dry human mandibles (convenience sample) were included. CBCT scans (PreXion3D Excelsior; PreXion Corp., San Mateo, CA, USA) were acquired with and without the tooth in place, at standard (0.1 mm slice thickness) and high (0.05 mm slice thickness) resolution. Scans with and without the tooth were superimposed, and two examiners performed linear measurements of crestal bone level and of bone thickness at 3, 6, and 9 mm apical to the cementoenamel junction. Measurements obtained before and after extraction were compared using two one-sided tests for equivalence with a prespecified, clinically derived margin of ±0.2 mm, stratified by resolution, surface, and measurement level, with a sensitivity analysis at alternative margins. Intra- and inter-examiner reliability was evaluated with the intraclass correlation coefficient (ICC). Results: Intra- and inter-examiner reliability was excellent (ICC > 0.9). Measurements obtained before and after extraction were equivalent within ±0.2 mm in all strata (p < 0.05), except for bone thickness measured at 9 mm on high-resolution scans (p = 0.349; mean difference -0.172 mm, 90% confidence interval -0.293 to -0.050 mm). Bone thickness tended to be slightly underestimated, and crestal bone level slightly overestimated, in the presence of the tooth. All strata met equivalence at a margin of ±0.30 mm, whereas fewer strata met a margin of ±0.15 mm. Conclusions: In this in vitro pilot study, pre-extraction CBCT measurements of socket-wall thickness and crestal bone level showed close agreement with post-extraction measurements of the same sites. Because the comparator was CBCT itself, absolute accuracy could not be established. These preliminary findings may support presurgical CBCT assessment for immediate implant planning but require confirmation in adequately powered studies with an independent reference standard and clinical validation.

Cureus
The University of Texas at San Antonio Health Science Center (US), Aristotle University of Thessaloniki (GR)
Good health and well-being
Dental Radiography and Imaging
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon