Rock fabric controls tensile strength anisotropy and fracture evolution in foliated metamorphic rocks

Brazilian tensile strength (BTS) test is widely used approach for measurement of tensile strength of rocks. The tensile behavior of foliated rocks is strongly influenced by the orientation of foliation and anisotropic fabrics causing anisotropy in strength. The anisotropy development in BTS is combined effects of mineralogical fabric, fracture evolution, and stress redistribution, which is insufficiently understood yet. This study investigated the complex relationship between anisotropic fabric orientation and the tensile behavior of metamorphic rocks having fabric and texture variation; fine-grained slate, medium-grained metasandstone, and coarse-grained banded gneiss. The research demonstrated anisotropy under BTS along with failure mechanisms, fracture geometry, and stress redistribution during loading. The slate exhibited the strongest anisotropy (BAI = 2.29), followed by banded gneiss (BAI = 1.49) showing minimum failure strength near β = 20° for both rocks, and metasandstone (BAI = 1.38) exhibited the weakest response at β = 80°. The maximum strength was developed at β = 90°, 40°, and 60°-70° for slate, metasandstone, and banded gneiss, respectively. The result signifies that the weakest loading orientation is controlled by rock fabric rather than a universal anisotropy angle. The fracture observations disclosed a systematic transition from parallel to foliation (PF) to across the foliation (AF) failure at transition angles of approximately 20-30° for slate and banded gneiss and 10-20° for metasandstone. Stress analysis showed that the increasing anisotropy promoted a shift from pure tensile failure to mixed compression-shear failure due to the stress redistribution. Moreover, a strong positive correlation was found between BTS and total fracture length having R 2 from 0.71 to 0.86. These observations signify that the fracture development is closely associated with energy dissipation during failure. The findings indicate that the continuity and mineralogical contrast of anisotropic fabrics are more influential in governing tensile anisotropy than the frequency of bands alone.

Authors

Institutions

Publication Details

Journal
Solid Earth Sciences
Published
2026-11-18
DOI
https://doi.org/10.1016/j.sesci.2026.100347
Primary Topic
Rock Mechanics and Modeling
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Rock fabric controls tensile strength anisotropy and fracture evolution in foliated metamorphic rocks

Suman Panthee, Saroj Shrestha, Ajita Bhandari, Md Faisal Rain et al.
Solid Earth Sciences
Rock Mechanics and Modeling
article

Rock fabric controls tensile strength anisotropy and fracture evolution in foliated metamorphic rocks

Suman Panthee, Saroj Shrestha, Ajita Bhandari, Md Faisal Rain, Durga Prasad Bashyal
article en

Abstract

Brazilian tensile strength (BTS) test is widely used approach for measurement of tensile strength of rocks. The tensile behavior of foliated rocks is strongly influenced by the orientation of foliation and anisotropic fabrics causing anisotropy in strength. The anisotropy development in BTS is combined effects of mineralogical fabric, fracture evolution, and stress redistribution, which is insufficiently understood yet. This study investigated the complex relationship between anisotropic fabric orientation and the tensile behavior of metamorphic rocks having fabric and texture variation; fine-grained slate, medium-grained metasandstone, and coarse-grained banded gneiss. The research demonstrated anisotropy under BTS along with failure mechanisms, fracture geometry, and stress redistribution during loading. The slate exhibited the strongest anisotropy (BAI = 2.29), followed by banded gneiss (BAI = 1.49) showing minimum failure strength near β = 20° for both rocks, and metasandstone (BAI = 1.38) exhibited the weakest response at β = 80°. The maximum strength was developed at β = 90°, 40°, and 60°-70° for slate, metasandstone, and banded gneiss, respectively. The result signifies that the weakest loading orientation is controlled by rock fabric rather than a universal anisotropy angle. The fracture observations disclosed a systematic transition from parallel to foliation (PF) to across the foliation (AF) failure at transition angles of approximately 20-30° for slate and banded gneiss and 10-20° for metasandstone. Stress analysis showed that the increasing anisotropy promoted a shift from pure tensile failure to mixed compression-shear failure due to the stress redistribution. Moreover, a strong positive correlation was found between BTS and total fracture length having R 2 from 0.71 to 0.86. These observations signify that the fracture development is closely associated with energy dissipation during failure. The findings indicate that the continuity and mineralogical contrast of anisotropic fabrics are more influential in governing tensile anisotropy than the frequency of bands alone.

Solid Earth SciencesVol. 11(4)
Tribhuvan University (NP), South Dakota School of Mines and Technology (US)
Rock Mechanics and Modeling
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon