PET Accelerates the Decomposition of HDPE During Co-Pyrolysis: A Non-Additive Interaction from Thermogravimetry to Bench Scale

Post-consumer polyolefin waste sent to pyrolysis commonly carries poly(ethylene terephthalate) (PET), yet yield and kinetic models for such feeds often treat their components as decomposing independently. We tested that assumption by comparing the thermogravimetric response of blends of high-density polyethylene (HDPE) and PET with the mass-weighted sum of the pure polymers measured in the same campaign, in single runs at 10, 20 and 50 % PET. All blends lost mass faster than the additive prediction, by 19 %–41 % of the initial mass between 400 °C and 500 °C, and the sign of the deviation held in two campaigns run a month apart at 9.8 °C min−1 and 20.3 °C min−1, although the ranking of the blends did not. Evolved-gas analysis placed the volatile maximum of every blend within 5 °C of HDPE, but the aliphatic channel (m/z 57) of the blends left the baseline 14 °C–24 °C below that of HDPE, against a repeatability of 2 °C. Micro-pyrolysis at 600 °C gave aromatics and acids at 0.9 %–11.4 % of the identified product area for blends with 10 to 50 % PET, against 50.4 % for PET alone. In a horizontal tube reactor, a 90:10 HDPE:PET feed held for 60 min at 450 °C–550 °C gave 83 %–88 % wax and at most 5.1 % GC-quantifiable liquid, with mass balances closing to 92 %–95 %. Without a pure-HDPE reactor run, this slate cannot be assigned to PET. The additive superposition of pure-polymer curves therefore underestimates how early a PET-bearing polyolefin feed loses mass, and the evolved-gas profiles show that this earlier loss includes an earlier onset of the polyolefin fraction.

Authors

Institutions

Publication Details

Journal
Green and Sustainable Environments
Published
2026-11-19
DOI
https://doi.org/10.62755/gsenv.2026.10
Primary Topic
Thermochemical Biomass Conversion Processes
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

PET Accelerates the Decomposition of HDPE During Co-Pyrolysis: A Non-Additive Interaction from Thermogravimetry to Bench Scale

Neza Rahayu Palapa, Tarmizi Taher, Aulia Annas Mufti, Muhamad F. Arif
2 links
Green and Sustainable Environments
Thermochemical Biomass Conversion Processes
article

PET Accelerates the Decomposition of HDPE During Co-Pyrolysis: A Non-Additive Interaction from Thermogravimetry to Bench Scale

Neza Rahayu Palapa, Tarmizi Taher, Aulia Annas Mufti, Muhamad F. Arif
article en

Abstract

Post-consumer polyolefin waste sent to pyrolysis commonly carries poly(ethylene terephthalate) (PET), yet yield and kinetic models for such feeds often treat their components as decomposing independently. We tested that assumption by comparing the thermogravimetric response of blends of high-density polyethylene (HDPE) and PET with the mass-weighted sum of the pure polymers measured in the same campaign, in single runs at 10, 20 and 50 % PET. All blends lost mass faster than the additive prediction, by 19 %–41 % of the initial mass between 400 °C and 500 °C, and the sign of the deviation held in two campaigns run a month apart at 9.8 °C min−1 and 20.3 °C min−1, although the ranking of the blends did not. Evolved-gas analysis placed the volatile maximum of every blend within 5 °C of HDPE, but the aliphatic channel (m/z 57) of the blends left the baseline 14 °C–24 °C below that of HDPE, against a repeatability of 2 °C. Micro-pyrolysis at 600 °C gave aromatics and acids at 0.9 %–11.4 % of the identified product area for blends with 10 to 50 % PET, against 50.4 % for PET alone. In a horizontal tube reactor, a 90:10 HDPE:PET feed held for 60 min at 450 °C–550 °C gave 83 %–88 % wax and at most 5.1 % GC-quantifiable liquid, with mass balances closing to 92 %–95 %. Without a pure-HDPE reactor run, this slate cannot be assigned to PET. The additive superposition of pure-polymer curves therefore underestimates how early a PET-bearing polyolefin feed loses mass, and the evolved-gas profiles show that this earlier loss includes an earlier onset of the polyolefin fraction.

Green and Sustainable EnvironmentsVol. 1(2)
Sriwijaya University (ID), Sumatera Institute of Technology (ID)
Hirosaki University
Responsible consumption and production
Thermochemical Biomass Conversion Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon