Numerical Analysis of Modified Tailoring Strategies of a Press-Hardened B-Pillar via Coupled Thermo-Mechanical Simulation
Tailored hot stamping of boron steel produces automotive components with locally adapted properties. This purely numerical study, not yet validated experimentally, investigates differential tailoring of a press-hardened 22MnB5 B-pillar using coupled thermo-mechanical simulations in Simufact Forming. After austenitization at 950 °C, uniform quenching (air with dies at 20, 400 and 500 °C, water, and convective media with heat transfer coefficients of 5–60 W/m2·K) was compared with divided dies combining cooling conditions with H13 (≈27 W/m·K) or HTCS-150 (≈66 W/m·K) tool-steel segments. Maximum T85 cooling rates ranged from below 8 °C/s to above 1000 °C/s, the latter only for uniform water cooling (quenching within 2 s), giving ultimate tensile strengths from below 900 MPa to approximately 1640 MPa. In the divided dies, heat was extracted through contact with the die segments; the hard middle zone cooled at about 63 °C/s and became nearly fully martensitic (99.3–99.5% martensite, ≈512–530 HV), separated from softer zones by transition zones of approximately 13–21 mm. HTCS-150 segments enabled in-die quenching times below one minute (excluding the 300 s furnace heating). Die thermal conductivity and cooling medium are effective levers for setting the local strength distribution of B-pillars; effects on weight and crash performance were not evaluated.
Authors
- Macole Sabat (ORCID: https://orcid.org/0000-0001-5804-6915)
- Nicolas Saba (ORCID: https://orcid.org/0000-0003-1957-4656)
- Saly Yaacoub (ORCID: https://orcid.org/0009-0009-1058-1789)
- Anna-Maria ElBayssari (ORCID: https://orcid.org/0000-0002-2558-9021)
- Rana Massouh
Institutions
- University of Balamand (LB)
Publication Details
- Journal
- Journal of Manufacturing and Materials Processing
- Published
- 2026-11-18
- DOI
- https://doi.org/10.3390/jmmp10110517
- Primary Topic
- Microstructure and Mechanical Properties of Steels
- Type
- article
- Field-Weighted Citation Impact
- 0.00