A Kuiper Belt Object Sample-Return-to-Orbit Variant, Sized by Collection, Cryogenic Storage and Rendezvous Budgets
A lander measures a surface where it stands, but a sample returned to orbit can be measured again and again, by instruments too large to land, and the same sample can be studied for years after the mission ends. Operating principle: a sample-return variant that lands on a Kuiper belt object, collects surface material, lifts it back to orbit in a small ascent vehicle, and stores it cold in a return capsule for rendezvous with an orbiter, so that the sample is measured in orbit rather than on the ground. The sample loses 21.4 percent to boiloff over 60 months of cryogenic storage, on a 2100 kilogram spacecraft drawing 430 watts. Sixty months of cold storage turn a surface sample into an orbital laboratory, and the boiloff fraction is what sets how much of it survives the wait. SIMULATED, NOT MEASURED. This is a computed study for civilian exploration: the design serves planetary science and carries no targeting or weapon application against any person, state or terrestrial object.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-18
- DOI
- https://doi.org/10.5281/zenodo.24328553
- Primary Topic
- Spacecraft Design and Technology
- Type
- article
- Field-Weighted Citation Impact
- 0.00