Wpływ parametrów procesowych oraz dodatków modyfikujących na strukturę i morfologię asymetrycznych membran polieterosulfonowych do zastosowań w niskociśnieniowej filtracji
Polyethersulfone (PES) membranes were prepd. via the non-solvent induced phase sepn. (NIPS) method, incorporating a functional additive: a carbonized product obtained from the pyrolysis of spent membranes. The effect of process parameters (type of solvent and compn. of the coagulation bath) and a modifying additive on the structure and properties of the resulting asymmetric PES membranes was studied. SEM anal. and goniometric measurements revealed that the system based on dimethylformamide (DMF) and polyvinylpyrrolidone (PVP) yielded higher open porosity compared to the NMP (N-methyl-2-pyrrolidone) system, while the addition of MeOH to the coagulation bath promoted the formation of finger-like macropores. The incorporation of 0.5% by mass of the waste-derived carbonized product modified nucleation kinetics, resulting in shorter finger-like channels and a denser, mech. robust sponge-like structure. The contact angle decreased significantly by 12°, which confirmed the increase in hydrophilicity of the membrane surface.
Authors
- Jolanta Janiszewska (ORCID: https://orcid.org/0000-0003-2911-0812)
Publication Details
- Journal
- PRZEMYSŁ CHEMICZNY
- Published
- 2026-11-18
- DOI
- https://doi.org/10.15199/62.2026.11.3
- Primary Topic
- Membrane Separation Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00