A Transition-Edge-Sensor Photon Counter: Energy Resolution, Efficiency and Count-Rate Budgets from Computed Thermal Physics
Counting photons is not enough when the measurement also needs the energy of each photon, and a detector that measures energy must turn a tiny packet of heat into a readable electrical signal. Operating principle: a transition-edge sensor, a superconducting film held on the steep edge of its resistive transition, in which one absorbed photon warms the film, raises its resistance, and produces a current pulse whose size measures the photon energy. The transition-edge sensor resolves photon energy to 0.15 electronvolts at a wavelength of 1550 nanometres, with a detection efficiency of 95 percent and a dark count rate of 1 count per second. The sensor resolves the energy of each photon to a fraction of an electronvolt while counting nearly every photon it receives, which is the capability that makes photon-number and spectral measurements at the single-quantum level possible. SIMULATED, NOT MEASURED. This is a computed study for a civilian sensing purpose: the device serves imaging, sensing, communications or illumination, and it carries no targeting or weapon application against any person, state or terrestrial object.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-18
- DOI
- https://doi.org/10.5281/zenodo.24336860
- Primary Topic
- Superconducting and THz Device Technology
- Type
- article
- Field-Weighted Citation Impact
- 0.00