Electrifying nonaqueous hydrogenation via aqueous redox and Pickering particle mediation

Electrocatalytic hydrogenation uses electricity and water to reduce organic compounds, potentially producing high-value chemicals with adjustable selectivity and reaction rate. However, many organic reactants have low solubility in water, limiting the utility of aqueous electroreduction. Meanwhile, nonaqueous electroreduction is likewise limited by the low ionic conductivity of these compounds and the difficulty of product separation. Here we describe a triphasic system that uses water-soluble redox-active molecules as rechargeable electron carriers and an amphiphilic Pd/C catalyst as an interfacial solid mediator. The redox molecule is electrochemically reduced in an aqueous alkaline electrolyte and then circulated to an oil-water-solid mixed reactor, where Pd/C transfers hydrogen equivalents to substrates in the organic phase. The engineering of Pickering solid catalysts improves mass transport in these triphasic systems. For styrene hydrogenation, the system produces ethylbenzene with high faradaic efficiency (~90%) and high mass-specific current density (~140 mA mgPd−1). Mechanistic studies show that mediator potential gates the formation of adsorbed hydrogen on Pd, controls the chemical potential of reductant, and tunes reaction rates across alkenes and carbonyl substrates. This approach provides a new alternative for the electrification of selective nonaqueous hydrogenation chemistry. Context Hydrogenation is essential in chemical manufacturing, and many important industrial processes depend on pressurized H2 and thermally driven reactors. Electrifying hydrogenation could allow renewable electricity to supply the reducing equivalents used in chemical manufacturing. Electrochemical hydrogenation also allows for better control over both the thermodynamics and kinetics of hydrogenation reactions, via the applied potential. However, conventional electrochemical cells face a difficult trade-off: aqueous electrolytes conduct ions well but dissolve many organic substrates poorly, whereas organic electrolytes dissolve substrates but often create high resistance and downstream separation burdens. Separating electrochemical mediator charging from hydrogenation addresses this trade-off. Aqueous electrochemistry is used only to charge a soluble redox molecule, while the organic hydrogenation occurs in a separate biphasic reactor where an interfacial solid catalyst relays hydrogen equivalents across the oil-water boundary. Mediator identity and state of charge tune the reducing potential, while the mass transport of ions, mediators, catalysts, and hydrophobic substrates can be optimized independently. The present work establishes the thermodynamic and kinetic principles of this approach using styrene and representative unsaturated and carbonyl substrates. he architecture offers an alternative route to electrify selective nonaqueous hydrogenation without external H2 and a means to buffer intermittent renewable electricity as stored reducing equivalents.

Authors

Institutions

Publication Details

Journal
ChemRxiv
Published
2026-11-17
DOI
https://doi.org/10.26434/chemrxiv.15012385/v1
Primary Topic
Electrocatalysts for Energy Conversion
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Electrifying nonaqueous hydrogenation via aqueous redox and Pickering particle mediation

Tatsuhiro Tsukamoto, Abdulrahman M. Alfaraidi, Richard Y. Liu, Dawei Xi et al.
ChemRxiv
Electrocatalysts for Energy Conversion
preprint

Electrifying nonaqueous hydrogenation via aqueous redox and Pickering particle mediation

Tatsuhiro Tsukamoto, Abdulrahman M. Alfaraidi, Richard Y. Liu, Dawei Xi, Michael J. Aziz, Michael S. Emanuel, Junlin Li, Zifei Yan
preprint en

Abstract

Electrocatalytic hydrogenation uses electricity and water to reduce organic compounds, potentially producing high-value chemicals with adjustable selectivity and reaction rate. However, many organic reactants have low solubility in water, limiting the utility of aqueous electroreduction. Meanwhile, nonaqueous electroreduction is likewise limited by the low ionic conductivity of these compounds and the difficulty of product separation. Here we describe a triphasic system that uses water-soluble redox-active molecules as rechargeable electron carriers and an amphiphilic Pd/C catalyst as an interfacial solid mediator. The redox molecule is electrochemically reduced in an aqueous alkaline electrolyte and then circulated to an oil-water-solid mixed reactor, where Pd/C transfers hydrogen equivalents to substrates in the organic phase. The engineering of Pickering solid catalysts improves mass transport in these triphasic systems. For styrene hydrogenation, the system produces ethylbenzene with high faradaic efficiency (~90%) and high mass-specific current density (~140 mA mgPd−1). Mechanistic studies show that mediator potential gates the formation of adsorbed hydrogen on Pd, controls the chemical potential of reductant, and tunes reaction rates across alkenes and carbonyl substrates. This approach provides a new alternative for the electrification of selective nonaqueous hydrogenation chemistry. Context Hydrogenation is essential in chemical manufacturing, and many important industrial processes depend on pressurized H2 and thermally driven reactors. Electrifying hydrogenation could allow renewable electricity to supply the reducing equivalents used in chemical manufacturing. Electrochemical hydrogenation also allows for better control over both the thermodynamics and kinetics of hydrogenation reactions, via the applied potential. However, conventional electrochemical cells face a difficult trade-off: aqueous electrolytes conduct ions well but dissolve many organic substrates poorly, whereas organic electrolytes dissolve substrates but often create high resistance and downstream separation burdens. Separating electrochemical mediator charging from hydrogenation addresses this trade-off. Aqueous electrochemistry is used only to charge a soluble redox molecule, while the organic hydrogenation occurs in a separate biphasic reactor where an interfacial solid catalyst relays hydrogen equivalents across the oil-water boundary. Mediator identity and state of charge tune the reducing potential, while the mass transport of ions, mediators, catalysts, and hydrophobic substrates can be optimized independently. The present work establishes the thermodynamic and kinetic principles of this approach using styrene and representative unsaturated and carbonyl substrates. he architecture offers an alternative route to electrify selective nonaqueous hydrogenation without external H2 and a means to buffer intermittent renewable electricity as stored reducing equivalents.

ChemRxiv
Harvard University (US), Somerville Hospital (US)
Electrocatalysts for Energy Conversion
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon