Design of Direct Field Oriented Control with Third-Order Sliding Mode Control for Induction Motors: FPGA-Based Hardware-in-the-Loop Verification
Abstract This study investigates the Hardware-in-the-Loop (HIL) validation of a Direct Field Oriented Control (DFOC) scheme for an induction motor (IM) incorporating a Third-Order Sliding Mode Controller (TOSMC). In conventional DFOC strategies, four cascaded control loops are employed to regulate rotor speed, rotor flux, and the direct and quadrature stator current components, commonly using Proportional–Integral (PI) controllers. In this work, these PI regulators are replaced by TOSMC to enhance the overall control performance. The proposed approach aims to improve robustness against parameter uncertainties, external disturbances, and tracking errors, while also alleviating the chattering phenomenon typically observed in first-order sliding mode control. Furthermore, the paper highlights the advantages of implementing the proposed DFOC-TOSMC architecture on a Field-Programmable Gate Array (FPGA). Owing to its inherent parallel processing capability, the FPGA implementation significantly reduces control loop latency to the microsecond range. Comprehensive simulation results and HIL co-simulation experiments confirm the effectiveness and reliability of the proposed control strategy when deployed on a Xilinx Zynq-7000 SoC ZC702 platform.
Authors
- Saber Krim (ORCID: https://orcid.org/0000-0001-5600-0825)
- Rakia Tarkhani (ORCID: https://orcid.org/0009-0007-0876-6552)
- Mohamed Faouzi Mimouni (ORCID: https://orcid.org/0009-0005-4677-5834)
Institutions
- University of Monastir (TN)
- École Nationale d'Ingénieurs de Metz (FR)
- Ecole Nationale d'Ingénieurs de Monastir (TN)
Publication Details
- Journal
- Engineering Research Express
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1088/2631-8695/aec370
- Primary Topic
- Sensorless Control of Electric Motors
- Type
- article
- Field-Weighted Citation Impact
- 0.00