Comparison of 3D photoactive ZnO nanotube membranes fabricated via electroless and sol–gel deposition

ZnO is a promising photocatalyst for the photodegradation of organic pollutants, and its nanostructuration is a key strategy to enhance its activity. In this work, well-defined three-dimensional (3D) networks of ZnO nanotubes with controlled diameters of 0.3 µm and 1 µm were prepared using a hard-templating approach to produce free-standing nanoporous membranes. Two fabrication methods were compared, namely sol-gel and electroless deposition. The impact of nanostructuration on photocatalytic performance was first evaluated under batch conditions. Compared to bulk ZnO, nanoparticles (NPs) exhibited enhanced photoactivity, thereby confirming the beneficial effect of nanostructuring. However, certain inherent limitations such as light distribution and mass-transfer constraints may restricted the effective translation of kinetics into productivity. When operating under continuous-flow conditions, the observed performance trends differed from those obtained in batch, highligthing the advantages of the 3D architecture. The 1 µm networks exhibited the best performance, with a kinetic constant 4.5 times higher and space-time yield approximately 9 times greater than those of ZnO NPs. A comparison of the synthesis routes shows that electroless deposition enables the formation of 3D ZnO networks without a subsequent calcination step and with reduced precursor consumption, while the sol-gel method offers greater flexibility in tuning the nanotube diameter. Given the superior performance of the 1 µm structures under flow conditions, electroless deposition appears as a particularly advantageous approach when considering both photocatalytic efficiency and process simplicity. As a whole, this work demonstrates that combining controlled 3D architectures of ZnO nanotubes with continuous-flow operation offers a promising route toward scalable photocatalytic processes for wastewater treatment.

Authors

Institutions

Publication Details

Journal
Nanoscale
Published
2026-11-17
DOI
https://doi.org/10.1039/d6nr02289h
Primary Topic
Advanced Photocatalysis Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Comparison of 3D photoactive ZnO nanotube membranes fabricated via electroless and sol–gel deposition

Sophie Hermans, Sophie Demoustier‐Champagne, Romain Weydisch, Lauraleen Barremaecker et al.
1 links
Nanoscale
Advanced Photocatalysis Techniques
article

Comparison of 3D photoactive ZnO nanotube membranes fabricated via electroless and sol–gel deposition

Sophie Hermans, Sophie Demoustier‐Champagne, Romain Weydisch, Lauraleen Barremaecker, Régis Peeters
article en

Abstract

ZnO is a promising photocatalyst for the photodegradation of organic pollutants, and its nanostructuration is a key strategy to enhance its activity. In this work, well-defined three-dimensional (3D) networks of ZnO nanotubes with controlled diameters of 0.3 µm and 1 µm were prepared using a hard-templating approach to produce free-standing nanoporous membranes. Two fabrication methods were compared, namely sol-gel and electroless deposition. The impact of nanostructuration on photocatalytic performance was first evaluated under batch conditions. Compared to bulk ZnO, nanoparticles (NPs) exhibited enhanced photoactivity, thereby confirming the beneficial effect of nanostructuring. However, certain inherent limitations such as light distribution and mass-transfer constraints may restricted the effective translation of kinetics into productivity. When operating under continuous-flow conditions, the observed performance trends differed from those obtained in batch, highligthing the advantages of the 3D architecture. The 1 µm networks exhibited the best performance, with a kinetic constant 4.5 times higher and space-time yield approximately 9 times greater than those of ZnO NPs. A comparison of the synthesis routes shows that electroless deposition enables the formation of 3D ZnO networks without a subsequent calcination step and with reduced precursor consumption, while the sol-gel method offers greater flexibility in tuning the nanotube diameter. Given the superior performance of the 1 µm structures under flow conditions, electroless deposition appears as a particularly advantageous approach when considering both photocatalytic efficiency and process simplicity. As a whole, this work demonstrates that combining controlled 3D architectures of ZnO nanotubes with continuous-flow operation offers a promising route toward scalable photocatalytic processes for wastewater treatment.

Nanoscale
UCLouvain (BE)
Fonds De La Recherche Scientifique - FNRS
Clean water and sanitation
Advanced Photocatalysis Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon