Influence of Fluorescent and Phosphorescent Pigments on the Optical, Thermal, and Morphological Characteristics of PP/HDPE Blends
Abstract Luminescent additives can provide optical functionality to polyolefin blends, but their effects on the host polymer’s thermal and morphological characteristics require careful evaluation. Here, polypropylene (PP)/high-density polyethylene (HDPE) blends with HDPE/PP ratios of 70/30, 50/50, and 30/70 were prepared by melt compounding with either fluorescent (FL) or phosphorescent (PH) pigment at a fixed loading of 10 wt%. Fluorescence spectroscopy of solvent-treated composite filtrates revealed pigment- and solvent-dependent emission profiles, including a prominent band near 535 nm for the FL-containing xylene filtrate. These spectra characterize the filtrates rather than the intrinsic emission of the solid composites. Differential scanning calorimetry showed distinct HDPE and PP melting transitions at approximately 135–138 °C and 164–168 °C, respectively, with limited shifts after pigment addition but composition-dependent changes in calculated crystallinity. For HDPE50/PP50, HDPE crystallinity increased from 60.40% to 74.04% (PH) and 70.09% (FL), whereas PP crystallinity decreased from 21.46% to 19.85% and 12.70%, respectively. Thermogravimetric analysis indicated predominantly single-stage degradation, with maximum degradation temperatures around 490–497 °C across the formulations. FT-IR and X-ray diffraction showed no readily detectable changes in the characteristic absorption bands or principal diffraction features of the polymer matrix, while scanning electron microscopy revealed pigment-dependent differences in local fracture-surface morphology. Overall, the findings show that the two pigment systems produce different crystallinity and surface-morphology responses despite largely retained melting and degradation profiles. This comparative assessment provides a basis for further development of luminescent PP/HDPE materials, although direct solid-state optical measurements and durability testing remain necessary for application-specific evaluation.
Authors
- Kamil Şirin (ORCID: https://orcid.org/0000-0002-0632-5848)
- Fehmi Saltan (ORCID: https://orcid.org/0000-0002-9347-6416)
- Dila Vural
Institutions
- Manisa Celal Bayar University (TR)
- Çankırı Karatekin University (TR)
Publication Details
- Journal
- Materials Research Express
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1088/2053-1591/aec363
- Primary Topic
- Polymer crystallization and properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu