Single period evaluation of 2D grating based on pseudo phase-stepping interferometry with a prism-grating interferometer
To address the demand for high-precision measurement of large-scale gratings in precision optical manufacturing and metrology, this study proposes a single-period evaluation method based on a prism-grating interferometer and pseudo-phase-stepping interferometry. Unlike existing four-step phase-stepping or least-squares iterative methods, this work employs the Hariharan algorithm, which is robust to phase-step errors, and constructs pseudo phase steps by numerically stepping the interference signal. The interferometer uses a symmetric optical path with zero optical path difference, effectively suppressing environmental disturbances. Experiments were performed on a 300 mm×70 mm 2D grating with a period of 833 nm. For a single-period calculation length (833 nm), the peak-to-valley (PV) values are 33.11 and 38.85 nm, respectively; when the calculation length is increased to 1 mm, the PV values decrease to 29.02 and 31.04 pm, respectively, achieving picometer-level average period measurement. Error analysis of the pseudo phase-stepping algorithm and air refractive index fluctuations is provided to explain the single-period fluctuations. This work achieves long-travel single-period and 1 mm-range comparative period measurements on a large-scale grating, showing significant improvements over recent work in measurement dimension, analysis scale, and completeness of error analysis.
Authors
- Huan Wang (ORCID: https://orcid.org/0000-0001-8530-7367)
- Chunlong Wei
- Yang Zhang (ORCID: https://orcid.org/0000-0003-3722-6807)
- Meiqi Yu
Institutions
- Jinan University (CN)
Publication Details
- Journal
- Optical Engineering
- Published
- 2026-11-18
- DOI
- https://doi.org/10.1117/1.oe.65.11.114105
- Primary Topic
- Optical measurement and interference techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Guangdong Provincial Pearl River Talents Program