Stabilization of Electrospun Poly(lactide- co -glycolide) Meshes against Relaxation-Associated Bulk Shrinkage to Preserve Mesh Architecture

Abstract Electrospun poly(lactide-co-glycolide) (PLGA) meshes are known to exhibit rapid shrinkage under physiological conditions, which can compromise architectural properties such as porosity and pore size, and adversely affect performance in applications such as drug delivery and tissue engineering. Although the role of glass transition temperature (Tg) is recognized, how material characteristics and incubation conditions jointly influence shrinkage dynamics and the resulting architectural changes, as well as the contribution of physical relaxation to these processes, remain poorly understood. In this work, we leverage an understanding of structure–property relations underlying shrinkage behavior in PLGA meshes to develop two antishrinkage strategies for preserving mesh architecture. In aqueous buffer at 37 °C (near the polymer Tg), PLGA50:50 and PLGA85:15 meshes exhibited rapid shrinkage at ∼20%/h, resulting in ∼47% reduction in mesh area, ∼11.5 percentage-point reduction in porosity and up to ∼20% reduction in characteristic pore size. Dry-state thermal analysis revealed changes in enthalpic recovery consistent with incubation-associated physical relaxation, while X-ray diffraction did not reveal crystallization. In the first antishrinkage strategy, increasing the electrospinning concentration increased the fitted characteristic enthalpic relaxation time, although fiber diameter also increased. This approach resulted in slower shrinkage corresponding to ∼32% area reduction, <6 percentage-point reduction in porosity, and 6–9% decrease in pore size. Strikingly, increased fiber diameter and buffer ingress rate on their own could not explain the shrinkage trends. In the second strategy, simultaneous electrospinning of separate PLGA and semicrystalline polycaprolactone fiber populations substantially mitigated shrinkage, with coelectrospun meshes exhibiting <16% area reduction, <4 percentage-point changes in porosity and <7% changes to pore size, despite continued buffer uptake. In summary, this work demonstrates two complementary routes to stabilizing PLGA meshes: modifying relaxation-associated behavior, and incorporating a semicrystalline fibrous network restraint.

Authors

Institutions

Publication Details

Journal
ACS Applied Polymer Materials
Published
2026-11-17
DOI
https://doi.org/10.1021/acsapm.6c01928
Primary Topic
Electrospun Nanofibers in Biomedical Applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Stabilization of Electrospun Poly(lactide- co -glycolide) Meshes against Relaxation-Associated Bulk Shrinkage to Preserve Mesh Architecture

Satyavrata Samavedi, Ashish Misra, Lalitha SriRamakrishnan
ACS Applied Polymer Materials
Electrospun Nanofibers in Biomedical Applications
article

Stabilization of Electrospun Poly(lactide- co -glycolide) Meshes against Relaxation-Associated Bulk Shrinkage to Preserve Mesh Architecture

Satyavrata Samavedi, Ashish Misra, Lalitha SriRamakrishnan
article en

Abstract

Abstract Electrospun poly(lactide-co-glycolide) (PLGA) meshes are known to exhibit rapid shrinkage under physiological conditions, which can compromise architectural properties such as porosity and pore size, and adversely affect performance in applications such as drug delivery and tissue engineering. Although the role of glass transition temperature (Tg) is recognized, how material characteristics and incubation conditions jointly influence shrinkage dynamics and the resulting architectural changes, as well as the contribution of physical relaxation to these processes, remain poorly understood. In this work, we leverage an understanding of structure–property relations underlying shrinkage behavior in PLGA meshes to develop two antishrinkage strategies for preserving mesh architecture. In aqueous buffer at 37 °C (near the polymer Tg), PLGA50:50 and PLGA85:15 meshes exhibited rapid shrinkage at ∼20%/h, resulting in ∼47% reduction in mesh area, ∼11.5 percentage-point reduction in porosity and up to ∼20% reduction in characteristic pore size. Dry-state thermal analysis revealed changes in enthalpic recovery consistent with incubation-associated physical relaxation, while X-ray diffraction did not reveal crystallization. In the first antishrinkage strategy, increasing the electrospinning concentration increased the fitted characteristic enthalpic relaxation time, although fiber diameter also increased. This approach resulted in slower shrinkage corresponding to ∼32% area reduction, <6 percentage-point reduction in porosity, and 6–9% decrease in pore size. Strikingly, increased fiber diameter and buffer ingress rate on their own could not explain the shrinkage trends. In the second strategy, simultaneous electrospinning of separate PLGA and semicrystalline polycaprolactone fiber populations substantially mitigated shrinkage, with coelectrospun meshes exhibiting <16% area reduction, <4 percentage-point changes in porosity and <7% changes to pore size, despite continued buffer uptake. In summary, this work demonstrates two complementary routes to stabilizing PLGA meshes: modifying relaxation-associated behavior, and incorporating a semicrystalline fibrous network restraint.

ACS Applied Polymer Materials
Indian Institute of Technology Hyderabad (IN)
Department of Biotechnology, Ministry of Science and Technology, India, Ministry of Education, India
Electrospun Nanofibers in Biomedical Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon