Process-property Relationships in Fused Filament Fabrication of 17-4PH Stainless Steel: Effects of Printing Parameters on Tensile Strength, Shrinkage, and Defect-sensitive Behavior

This study investigates the effect of selected Fused Filament Fabrication parameters on the tensile behavior and dimensional change of 17-4PH stainless steel specimens produced from BASF Ultrafuse filament. Layer height, printing speed, and infill angle were evaluated using a Taguchi-based experimental design, while the printed parts were subsequently subjected to catalytic debinding and sintering. Tensile testing of the as-sintered specimens showed that the best-performing parameter combination reached 802 MPa, corresponding to approximately 80% of the tensile strength reported by the material supplier. The statistical analysis identified layer height as the most influential factor, followed by infill angle, whereas printing speed had a smaller effect within the investigated range. In addition to the primary tensile and shrinkage evaluation, supplementary dimensional, density-related, and fracture-surface observations were used to support the interpretation of the results. These findings indicate that the final mechanical response cannot be explained solely by nominal printing settings, but must be understood through their effect on green-part integrity, densification, shrinkage, and internal defect formation during post-processing. Overall, the results show that the performance of extrusion-based 17-4PH stainless steel parts is governed by the combined effect of deposition strategy and thermal treatment, and that reliable parameter selection can significantly improve the mechanical quality of sintered components.

Authors

Publication Details

Journal
Periodica Polytechnica Transportation Engineering
Published
2026-11-16
DOI
https://doi.org/10.3311/pptr.40046
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Process-property Relationships in Fused Filament Fabrication of 17-4PH Stainless Steel: Effects of Printing Parameters on Tensile Strength, Shrinkage, and Defect-sensitive Behavior

György Ledniczky, Adrian Bognar, Krisztián Kun
Periodica Polytechnica Transportation Engineering
Additive Manufacturing and 3D Printing Technologies
article

Process-property Relationships in Fused Filament Fabrication of 17-4PH Stainless Steel: Effects of Printing Parameters on Tensile Strength, Shrinkage, and Defect-sensitive Behavior

György Ledniczky, Adrian Bognar, Krisztián Kun
article en

Abstract

This study investigates the effect of selected Fused Filament Fabrication parameters on the tensile behavior and dimensional change of 17-4PH stainless steel specimens produced from BASF Ultrafuse filament. Layer height, printing speed, and infill angle were evaluated using a Taguchi-based experimental design, while the printed parts were subsequently subjected to catalytic debinding and sintering. Tensile testing of the as-sintered specimens showed that the best-performing parameter combination reached 802 MPa, corresponding to approximately 80% of the tensile strength reported by the material supplier. The statistical analysis identified layer height as the most influential factor, followed by infill angle, whereas printing speed had a smaller effect within the investigated range. In addition to the primary tensile and shrinkage evaluation, supplementary dimensional, density-related, and fracture-surface observations were used to support the interpretation of the results. These findings indicate that the final mechanical response cannot be explained solely by nominal printing settings, but must be understood through their effect on green-part integrity, densification, shrinkage, and internal defect formation during post-processing. Overall, the results show that the performance of extrusion-based 17-4PH stainless steel parts is governed by the combined effect of deposition strategy and thermal treatment, and that reliable parameter selection can significantly improve the mechanical quality of sintered components.

Periodica Polytechnica Transportation Engineering
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon