Experimental Investigation of Sodium Citrate Assisted Electrolyte in Electrochemical Machining of AISI 304 Stainless Steel
Abstract This study experimentally explores the influence of adding sodium citrate (Na 3 Cit) to a sodium nitrate (NaNO 3 ) electrolyte in electrochemical machining (ECM) of AISI 304 stainless steel when using a palladium-coated tool electrode. The machining voltage, duty cycle, and electrolyte concentration were adjusted, while the machining rate (MR) and overcut (OC) were assessed. Raising the voltage from 6 to 11 V increased the MR from 0.20 to 0.42 µm/ s for NaNO 3 ; however, NaNO 3 + Na 3 Cit reached 0.52 µm/ s at 11 V, which is about 24% higher. Within the same range, OC dropped from 343 to 221 µm for NaNO 3 and from 302 to 204 µm for the mixed electrolyte. At a 90% duty cycle, the NaNO 3 + Na 3 Cit mixture achieved an MR of 0.35 µm/s, compared to 0.30 µm/s for NaNO 3 alone; meanwhile, OC dropped to 220 and 240 µm, respectively. At an electrolyte concentration of 0.41 mol/L, the MR was 0.46 µm/ s for the mixed electrolyte and 0.44 µm/ s for NaNO 3 , with corresponding OC values of 210 and 230 µm. SEM observations showed cleaner, nearly circular holes with less sludge and sharper edge definition when using NaNO 3 + Na 3 Cit. The results show that citrate-enhanced electrolyte boosts MR, dimensional accuracy, and electrochemical stability by enhancing complexation, optimizing current distribution, facilitating removal of reaction products, and better localizing anodic dissolution.
Authors
- Vinod Kumaar J. R.
- P. Venugopal
- Saravanan Kanthasamy Ganesan
- Nethaji Subash Chandra Bose Ayyavoo (ORCID: https://orcid.org/0009-0007-0375-3963)
- Karthick. S
- Jegadheesan. C
Institutions
- Dr. N.G.P. Institute of Technology (IN)
- Sona College of Technology (IN)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-17
- DOI
- https://doi.org/10.21203/rs.3.rs-11275386/v1
- Primary Topic
- Advanced Machining and Optimization Techniques
- Type
- preprint