A Hopper for Multi-Site Sampling Across the Enceladus South Pole, Sized by Hop, Propellant and Range Budgets
A six-hundred-ten-kilogram hopper lands once, samples the ground, then fires its engine and arcs six kilometres to a fresh site, repeating the jump until its propellant is spent, turning one landing into a traverse of several distinct terrains. Its operating principle: hopper variant for multi-site south-polar sampling, where ballistic jumps replace wheels because the moon's pull amounts to one hundredth of Earth's and its surface has no air, making a short rocket hop cheaper than driving, and each hop lands on ground no rover could reach in the same time. Headline values are sph target distance sph au = 9.5; sph solar flux sph w per m2 sph = 15.08; sph solar flux sph percent of earth sph = 1.108; sph equilibrium temperature sph k = 90.29; sph adopted surface sph temperature k = 75; sph hohmann reference sph transfer years = 6.015. Six hops buy six terrains for the price of one landing, and the propellant ledger is the itinerary. SIMULATED, NOT MEASURED. Sampling several south-polar terrains with one lander serves civilian geology: composition across distinct units for open research. The hopper jumps between cracks and plains, harming nothing and nobody.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-17
- DOI
- https://doi.org/10.5281/zenodo.24302294
- Primary Topic
- Spacecraft Design and Technology
- Type
- article
- Field-Weighted Citation Impact
- 0.00