Water Diffusion in Additively Manufactured Polymers: Experimental Characterisation and Anisotropic Finite-Element Modelling
The performance of polymers produced with fused deposition modelling (FDM) in marine environments is a critical property for their engineering applications. This study investigates the water-ageing behaviour of polylactic acid (PLA), polyethylene terephthalate glycol (PETG), and carbon-fibre-reinforced PETG (PETG-CF) employing experimental testing and numerical modelling. Water-immersion tests were conducted for two weeks to evaluate the moisture uptake, while changes in surface roughness before and after ageing were assessed together with Shore D hardness. Finite-element (FE) diffusion models based on Fickian diffusion theory were developed in ABAQUS to simulate the moisture transport and predict the evolution of moisture concentration. The obtained results showed that all polymers exhibited diffusion behaviour consistent with Fick’s law. Water ageing affected both surface roughness and hardness of the studied materials, although the extent of degradation varied among them. Good agreement was obtained between the experimental observations and numerical predictions, confirming the capability of the ABAQUS models to accurately capture the moisture-diffusion behaviour. Furthermore, an anisotropic diffusivity assumption, introduced to account for FDM-induced defects and directional transport pathways, was verified through FE analysis. Compared with the detailed isotropic model, the simplified anisotropic model achieved reasonable prediction accuracy while significantly reducing the computational cost.
Authors
- Vadim V. Silberschmidt (ORCID: https://orcid.org/0000-0003-3338-3311)
- Konstantinos P. Baxevanakis (ORCID: https://orcid.org/0000-0002-4826-3454)
- Boyu Li (ORCID: https://orcid.org/0009-0004-1990-3784)
Institutions
- Loughborough University (GB)
Publication Details
- Journal
- Journal of Composites Science
- Published
- 2026-11-16
- DOI
- https://doi.org/10.3390/jcs10110614
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00