Geometry-dependent sediment pressure in salt caverns: A Janssen-based formulation validated against coupled simulations
Abstract A large amount of sediment is generated during salt cavern construction by solution mining in China's bedded salt rock. The highly connected pore structure inside the sediment has considerable energy storage potential, which urgently requires further development. However, as a key factor affecting the stability of salt cavern gas storage, the method for calculating sediment pressure remains to be improved. Based on the Janssen equation, this study established a calculation method for the normal pressure exerted by sediment on the salt cavern wall under the condition of continuous solution mining in high-impurity salt mines. This method was embedded into FLAC 3D as a validation model, and comparative verification was conducted with a benchmark model constructed using PFC 3D -FLAC 3D coupled numerical simulation. The results show that: (1) This method can significantly improve computational efficiency with small errors: the sediment pressure error is less than 0.03 MPa, the absolute error of cavern wall displacement is less than 5 mm, and the relative error of cavern wall displacement is less than 5%; (2) The sediment pressure distribution is significantly influenced by cavern geometry and sediment accumulation height, whereas the effect of cavern radius is relatively limited. When the friction coefficient between the sediments and cavern wall is relatively large, the normal pressure may decrease locally near the cavern bottom; (3) Under low operating gas pressure conditions, the enhancement effect of sediment on salt cavern stability has non-negligible engineering value.
Authors
- Ying Li (ORCID: https://orcid.org/0000-0003-1829-7327)
- Guimin Zhang (ORCID: https://orcid.org/0000-0001-6674-5820)
- Xilin Shi
- Yibo Wu
- Peng Li
- Hao Zhang
- Yuxuan Liu
Institutions
- Chinese Academy of Sciences (CN)
- China University of Mining and Technology (CN)
- Chery Automobile (China) (CN)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-17
- DOI
- https://doi.org/10.21203/rs.3.rs-11456581/v1
- Primary Topic
- Rock Mechanics and Modeling
- Type
- preprint
Funders
- National Natural Science Foundation of China
- Chinese Academy of Sciences
- State Key Laboratory of Geomechanics and Geotechnical Engineering
- Institute of Rock and Soil Mechanics, Chinese Academy of Sciences