Fusing ADS-B Cooperative Sensor Data with MWIR Imaging: A Quantitative Calibration and Validation Framework for Dynamic Target Observation
Mid-wave infrared (MWIR) imaging sensors used for air-to-air target detection suffer from dynamic range limitations in their focal plane arrays (FPAs). The difference in irradiance between high-temperature exhaust nozzles and low-temperature wings causes FPA saturation and blooming, significantly reducing the ability to acquire useful information. To address this limitation, we utilize the Automatic Dependent Surveillance-Broadcast (ADS-B) system as an external geometric reference source, providing target position information independent of the MWIR imaging chain. Based on this heterogeneous sensor fusion paradigm, we established a transformation model from the WGS-84 to the East–North–Up (ENU) coordinate system and a pinhole imaging geometry model to drive MWIR sensor simulations within a slant range of 1–7 km, and conducted multiple field experiments. The horizontal positioning accuracy of the received ADS-B messages was quantified using the “Navigation Accuracy Category” (NACp) field, where received values of 8–10 correspond to a 95% confidence interval of 10–92.6 m. Experimental results from four validation sorties show that, relative to the ADS-B reference and under its NACp-quantified uncertainty, the proposed framework keeps LOS angular errors within the credibility criteria of ±0.5° in azimuth and ±0.3° in elevation; near-range results should be interpreted as agreement with the ADS-B reference rather than as absolute sensor characterization.
Authors
- 林存宝
- Xiali Ma
- Shuping Huang (ORCID: https://orcid.org/0009-0004-9797-7439)
- Yangxin Zheng
- Haonan Li
- Yurong Liao
Institutions
- Space Engineering University (CN)
Publication Details
- Journal
- Sensors
- Published
- 2026-11-16
- DOI
- https://doi.org/10.3390/s26227220
- Primary Topic
- Advanced Measurement and Detection Methods
- Type
- article
- Field-Weighted Citation Impact
- 0.00