Effect of Liquid Metal Velocity during Low-Pressure Casting on the Microstructure and Mechanical Properties of Al12Si Alloy

Abstract In this study, low-pressure die casting (LPDC) of the Al12Si (LM6) alloy was experimentally fabricated. For the Al12Si alloy, the velocity of the liquid metal in the gate cross sectional area was selected as 0.25, 0.50, and 1.00 m/s. To ensure the liquid metal's velocity, the metal was injected into the mould cavity using the required Argon gas, in accordance with Bernoulli's principle. Microstructural investigations and mechanical properties of an Al12Si alloy at different liquid metal velocities were evaluated. Microstructural analyses were performed using optical microscopy (OM) and scanning electron microscopy (SEM). Tensile and hardness tests were applied as mechanical tests. In microstructural examinations, it was determined that Al dendrites morphologically changed from linear-colonial to star-shaped as the liquid metal velocity increased. In addition, it has been determined that, during the solidification process under pressure, the liquid metal velocity and the Al-Si eutectic yield finer grains and a decrease in porosity. According to the density test results, the highest density was 2,465 g/cm³ at a liquid metal velocity at the gate of 0.5 m/s, and the lowest was 2,324 g/cm³ at a liquid metal velocity at the gate of 0.25 m/s. The change in hardness values could not be determined. According to the average tensile test results, the highest tensile strength was obtained at a liquid metal velocity at the gate of 0.5 m/s, 143 MPa (4.47% elongation), and the lowest tensile strength was obtained at a liquid metal velocity at the gate of 0.25 m/s, 125 MPa (3.48% elongation).

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-17
DOI
https://doi.org/10.21203/rs.3.rs-10727707/v1
Primary Topic
Aluminum Alloy Microstructure Properties
Type
preprint

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Effect of Liquid Metal Velocity during Low-Pressure Casting on the Microstructure and Mechanical Properties of Al12Si Alloy

Tansel Tunçay, Badegül TUNÇAY, Derya Dışpınar, Abdulsefa CİN
3 links
Research Square
Aluminum Alloy Microstructure Properties
preprint

Effect of Liquid Metal Velocity during Low-Pressure Casting on the Microstructure and Mechanical Properties of Al12Si Alloy

Tansel Tunçay, Badegül TUNÇAY, Derya Dışpınar, Abdulsefa CİN
preprint en

Abstract

Abstract In this study, low-pressure die casting (LPDC) of the Al12Si (LM6) alloy was experimentally fabricated. For the Al12Si alloy, the velocity of the liquid metal in the gate cross sectional area was selected as 0.25, 0.50, and 1.00 m/s. To ensure the liquid metal's velocity, the metal was injected into the mould cavity using the required Argon gas, in accordance with Bernoulli's principle. Microstructural investigations and mechanical properties of an Al12Si alloy at different liquid metal velocities were evaluated. Microstructural analyses were performed using optical microscopy (OM) and scanning electron microscopy (SEM). Tensile and hardness tests were applied as mechanical tests. In microstructural examinations, it was determined that Al dendrites morphologically changed from linear-colonial to star-shaped as the liquid metal velocity increased. In addition, it has been determined that, during the solidification process under pressure, the liquid metal velocity and the Al-Si eutectic yield finer grains and a decrease in porosity. According to the density test results, the highest density was 2,465 g/cm³ at a liquid metal velocity at the gate of 0.5 m/s, and the lowest was 2,324 g/cm³ at a liquid metal velocity at the gate of 0.25 m/s. The change in hardness values could not be determined. According to the average tensile test results, the highest tensile strength was obtained at a liquid metal velocity at the gate of 0.5 m/s, 143 MPa (4.47% elongation), and the lowest tensile strength was obtained at a liquid metal velocity at the gate of 0.25 m/s, 125 MPa (3.48% elongation).

Research Square
Karabük University (TR), Sivas Bilim ve Teknoloji Üniversitesi (TR), SINTEF Industry (NO)
Karabük Üniversitesi
Aluminum Alloy Microstructure Properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon